Way better than the other model that seems to be banned from Makerworld now, this seems way more like a real product. I had some issues with the outer screen being printed little incorrectly and the sticking out part of the back at the hinge is fragile. Other than that the hinge itself functions great. Thanks for sharing.

Used this profile to test new material brand, works well.

Have printed many of these (same one but from printer memory) had one broke so printed 2 extra.

Fun print but the head part is not really tight so it won’t hold up the head straight.

Printed 2 versions. One in multi color but it’s too much purge waste. I put the parts in, set my heat bed to high temp and put it on the bed to melt them together. You really have to put it in your controller correctly to have it working right, I think there might be a better shape to get it to work better but overal nice print, thanks!

plane

printed in ABS, looks and works great. the sides have some transformation but that might just be the ABS.

Some don’t roll smoothly and the profile has an issue where it’s dragging the ball parts across the board, happens at the same time each print.

some parts are a little rough especially at support parts but I will maybe try something like a heatgun soon to smoothen it.

The original print failed me, this one works great and makes it more modular so you could replace parts.

clean build, clean fit. Love the screwless design. Bambu PLA Matte. (might consider other options in case of outside usage)

The print quality is fine, however the individual parts are a little loose. There is a chance of them getting out of sync as seen in last attached image. I think this can be resolved by modifying the model a little bit.

Very beautiful and useful. I found someone using the original version at WHY2025, ever since then I wanted this. Recently got my personal printer and this is a great print profile. I have used Bambu PLA MAT (Charc) & PLA SILK (Gold)

So far so good, showed it to someone when it finished and now I have to print another 😇

shoot out fine but in is tricky like 50% it just slides down by itself and then I have to push it to shoot again

Clean, works well.

tiny lose strings but overal good quality. just be careful with what you put in, it’s very difficult to get money back out of it when it’s pushed down. TIP: Print a tweezer if you don’t have one :P