Buildable P-61B Black Widow model from a kit card. Assembly instructions are down below in the description.

Due to the fighter jet contest, I found myself researching military aircraft that the USA used to use. I stumbled upon the P-61B Black Widow and it caught my eye because of the unique shape and windows on the fuselage and I decided it would be cool to make a kit card out of it. I tried to add as much detail as possible in this minimalistic kit card. I hope you all enjoy!

Assembly (pieces are meant to be a tight fit but they will slide on with some force):

1. Use a side cutters to remove all pieces from the kit card.

   

2. Slide the fuselage onto the wing, centering it on the middle line on the top of the wing. Make sure the full length flat part is towards the front.

   

3. Slide one of the four engine pieces onto the wing, centering it on the line closest to the center.

   

4. Slide a side panel on to the wing, ensuring the line details are pointed outwards. Slide this piece until it is touching the piece from step 3.

   

5. Slide one of the 3 remaining engine pieces onto the wing so it touches the piece from step four. If it was assembled correctly, this piece should be centered on the other line on this side of the wing.

   

6. Repeat steps 3-5 for the other side of the wing.

   

7. Attach the rear wing to the side panels.

   

8. Put the propeller on the aircraft.

   

9. Secure the propeller in place with the propeller stop.

   

10. Repeat steps 8 and 9 for the other propeller.

    

Enjoy!