Stormtrooper with M4
Stormtrooper with M4
Print Profile(1)
Description
Hueforge Stormtrooper. This is my first Hueforge so do be too critical please. I used all BambuLabs PLA Filament mostly matte.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.05x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.7
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Matte Dark Green Transmission Distance: 0.8
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to BambuLab Green
At layer #13 (1.12mm) swap to Pine Green
At layer #14 (1.2mm) swap to Dark Brown
At layer #16 (1.36mm) swap to Latte Brown
At layer #19 (1.6mm) swap to Ash Gray
At layer #23 (1.92mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)