This is a large case with a latch which fills the bed of the X1C, for putting generic items in. The case dimensions are approximately 255x227. It has four feet on the bottom, so it can easily stand up as pictured. The case is hinged and features functional latches.
Boost Me (for free)
If you like my work please consider supporting me by subscribing to me on Printables, even if only for a month. Boosts are also welcome, thank you!
Please note to only use washers where indicated.
![]() | Install four of the inserts into the top section of the case in the holes indicated. |
![]() | In the bottom half of the case install eight inserts into the holes indicated. |
![]() | The hinges on the top part of the case have a hexagonal hole on the inner part of the hinge.
Insert one of the M3 lock nuts in the hexagonal hole on each side. |
![]() | Taking care that the lock nuts do not fall out, place the upper part of the case onto the bottom half as pictured. |
![]() | While supporting the lock nut with your finger from the opposite side, screw in an M3x20 screw into each hinge.
Do not over tighten or you may break the hinge. |
![]() | Find the two upper latch parts and install them into the lid using M3x16 screws. |
![]() | The latch arms each have a hexagonal hole for a lock nut. Insert one into each arm. |
![]() | Line the arm up with the main body of the latch and while supporting the lock nut with your finger on the opposite side, insert an M3x20 screw and tighten it up.
The screw should not be completely tight, as the main body of the latch should be free to move within the arm. |
![]() | Align the assembled latch parts with the retainer as pictured. |
![]() | Place the assembled latch parts onto the mountand connect with two M3x8 screws. This may be easier to install with the lid open rather than as pictured. |
![]() | Noting the orientation of the hinged parts align the handle and hinges as pictured. |
![]()
| Attach the handle to the mount points on the front of the case using M3x8 screws and washers. |
![]()
| Congratulations, you are done! How about a boost? :) |
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)