Spiral Lamp Shade

Copyright Claim

Spiral Lamp Shade

Boost
48
103
21

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

43mm_vase_0.4nozzle
43mm_vase_0.4nozzle
2.8 h
1 plate
5.0(4)

Open in Bambu Studio
Boost
48
103
21
5
82
19
Released

Description

Boost Me (for free)

Spiral Lamp Shade – 3D Printed Elegance
Elevate your space with this elegantly crafted 3D printed spiral lamp shade, designed to fit seamlessly with most standard lamps. Available in 29mm and 43mm inner diameter rings, it ensures compatibility while adding a touch of sophistication to your decor. The sleek, minimalist design casts stunning light patterns, making it ideal for living rooms, bedrooms, or workspaces.

 

Recommended Print Settings:
    •    Printing Mode: Vase Mode (Spiralized Contour Mode)
    •    Print Speed: Very slow (varies by machine)
    •    Mount Thickness: If you want the mount to be thicker, increase the bottom layers in your slicer, as vase mode limits thickness. The original design is 3mm thick, so to match this, adjust the bottom layers accordingly. For example, if printing at 0.2mm layer height, you will need 15 layers to reach 3mm.
    •    Duration: May take up to 12 hours for a flawless result
    •    Tip: Slow speeds enhance surface quality, delivering a professional finish.

 

Perfect for modern, rustic, or minimalist interiors, this spiral lamp shade is not just functional but also a testament to advanced 3D printing craftsmanship. Create your own masterpiece today!

 

Elevate your 3D printing skills

 

Bill of Materials

Bambu Filaments
G02-W0-1.75-1000-SPLFREE
× 1
G01-B0-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (21)

Please fill in your opinion
(0/5000)

Boosted
Very nice, but too small for me. Coul'd you do a bigger one ? Scale it up in x/y/z to 245 mm diameter, but keep the holes 29 and 43 mm ? Thanks. //Tarzzz
The designer has replied
1
Reply
Added your request large size 245mm with 29mm and 43mm rings don't forget to share your print
1
Reply
Boosted
Replying to @3dmassprod :
Saw that you added the bigger size. THANK YOU ! Boost is coming !
(Edited)
0
Reply
Boosted
Hmmm... the 245 mm models are both 322 mm in diameter and doesn't fit my plate ?? The ring is correct 43/29 mm, so i can't scale it down to 245 mm because than the ring get too small.
0
Reply
Boosted
Print Profile
43mm_vase_0.4nozzle
My bathroom light broke and I needed a replacement, for 60g of plastic you couldn't ask for more! Boosted!
1
Reply
Thanks appreciate your support very nice print 👍👍
1
Reply
Boosted
Print Profile
43mm_vase_0.4nozzle
Beautiful design, with minimal filament usage. The only thing that could be improved is the stem/neck, which feels a bit flimsy.
0
Reply
Print Profile
43mm_vase_0.4nozzle
the base could use a bit more thickness but other than that a nice little lamp shade. thank you.
1
Reply
You can increase bottom layers base can be thick up to 3mm but vase mode limits bottom layers must change it in slicer
0
Reply
Replying to @3dmassprod :
thank you
0
Reply
Everything is fine, but I would make the lamp mount thicker. Right now it’s about 0.6 mm, but it would be better if it were at least 1 mm.
The designer has replied
1
Reply
Check the printing sittings vasemode limits the bottom layers in some slicers original design it's 0.8 thick
0
Reply
Boosted
Now there are 249 mm size, fitting the BambuLab printers 256x256x256 mm !
1
Reply
Boosted
Very nice model. Now in bigger size too !
0
Reply
Print Profile
43mm_vase_0.4nozzle
1
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.