Super Deluxe Shaker Kit - PETG - Multiple Options by BATTCAVE

BATTCAVE

Tools>Gadgets

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

TALL KIT - PETG - 0.2mm layer, 3 walls, 20% infill

Designer

5.7 h

1 plate

5.0(7)

SHORT KIT - PETG - 0.2mm layer, 3 walls, 20% infill

Designer

4.7 h

1 plate

4.7(7)

CONTAINERS ONLY - PETG - 0.2mm layer, 3 walls, 20% infill

Designer

8.8 h

2 plates

5.0(3)

INSERTS ONLY - PETG - 0.2mm layer, 3 walls, 20% infill

Designer

1.6 h

3 plates

5.0(2)

Click to see more

Open in Bambu Studio

Boost

362

791

471

177

Released

Description

Super Deluxe Shaker Kit - Tall & Short - 3 Insert Options

Tall is 108mm Tall - 65mm Diameter

Short is 83mm Tall - 65mm Diameter

Coarse & Fine Shaker Inserts and a Pour Insert for maximum versatility. Inserts are a slip fit, they stay in place very well. I would be happy to make additional inserts if there are specific requests. Large robust thread wont gunk up.

Use these for just about anything from fish food to glitter crafts. So versatile.

PETG is the best material for these so these profiles are all for PETG. As with all of my profiles, these are built to last.

Example printed in Sunlu White PETG.

Comment & Rating (47)

@BakerManDan

Very nice design! I used PLA and printed the inserts at 99.6% and made them a bit shorter to make them easier to insert and take out without breaking the inserts' walls.

The designer has replied

@BattCave

When you don't follow the plan, this is what happens. ;) - PLA is not the way. I would be shocked if those inserts are not falling out after two fills. Use PETG.

@BakerManDan

Replying to @BattCave :

I don't have any PETG, but the mods appear to be working just fine. Your mileage may vary.

@hairless77

Dankeschön!

@qBrian

Boosted

A truly magnificent project and excellent print profiles; it would be wonderful to add an insert for dispensing cocoa powder and powdered sugar, and perhaps even a label for personalized use.

The designer has replied

Show original

@BattCave

So a finer insert for those? Let me know and I will craft it up!

@qBrian

Boosted

Replying to @BattCave :

Exactly And could you create a space on the jar body to insert some text

Show original

@hairless77

The canister is gorgeous I am however unfortunately unable to insert the inserts X1C high-rise set I believe I must rescale them to 99% for printing Perhaps it is due to the fact that I printed it with PLA at 016 High Quality I might try again completely with PETG

The designer has replied

Show original

@BattCave

When you don't follow the plan, this is what happens. ;) - PLA is not the way. I would be shocked if those inserts are not falling out after two fills. Use PETG.

(Edited)

@BakerManDan

I printed the inserts at 99.6% using PLA and they're just snug enough to stay put. I also made the walls a little shorter. See my photo above. So far so good!

@hairless77

Replying to @BakerManDan :

Thank you for the tip

Show original

@BjoernPe

Boosted

Print Profile

INSERTS ONLY - PETG - 0.2mm layer, 3 walls, 20% infill

Top model. Exceptionally precise fit, flawless print

Show original

@BattCave

Thank you!

@user_2152747211

Boosted

Perfect!!!!

The designer has replied

@BattCave

Thank you!

@BjoernPe

Boosted

Print Profile

CONTAINERS ONLY - PETG - 0.2mm layer, 3 walls, 20% infill

Robust, precisely fitting, and a very accommodating creator who provides excellent support for their model

Show original

@BattCave

Thank you!

@user_1729956811

Boosted

Print Profile

TALL KIT - PETG - 0.2mm layer, 3 walls, 20% infill

All is well 👍

Show original

@BattCave

Thank you!

@Kaal

Boosted

Finally, a worthy receptacle for my drawer full of stolen Little Caeser's Zap Paks (the most perfect seasoning blend on God's Good Earth)

The designer has replied

@BattCave

Hah! Thank you!

@user_168235884

Boosted

Print Profile

SHORT KIT - PETG - 0.2mm layer, 3 walls, 20% infill

Printed with PETG HF without issues. Excellent print profile

Show original

@BattCave

Thank you!

@nmonari

Boosted

The print profile is no longer public

Printed in PETG, the result is perfect. Thank you!

@BattCave

Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License