Boost Me (for free)
Membership
If you would like to support me by buying me a coffee or just to support my work. Think about signing up for my membership! More models coming soon!!!!!
Designed to work with 1 X 8 planks
It is recommended to print a dove tail insert and the tip of one of the base parts to make sure you dovetails will not be too tight or too loose. If it is too tight or too loose adjust the size of the insert up or down by .5% increments until snug
If you would like the shelves to be slanted more there are risers that you insert into the back slot on the bottom dovetail slot. you can change it to 2, 4, or 6 degrees steeper
The set back riser gives it the look from the photos and the normal short and tall risers stack them vertically.
Each Part uses a dovetail insert to connect to each other
I will be posting a tutorial video here soon. along with instructional pictures.
.28 layer
3 walls
8% gyroid infill
4 bottom layers
4 top layers
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)