Spiral Puzzle by Oleksandr T2LMakerWorld: Download Free 3D Models

Oleksandr T2L

Toys & Games>Puzzles

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

10.5 h

2 plates

5.0(13)

No AMS 0.2mm layer, 2 walls, 15% infill

Designer

9.9 h

3 plates

5.0(3)

Open in Bambu Studio

Boost

146

346

205

Released

Description

A vibrant swirl of colors makes this abstract jigsaw puzzle both captivating and challenging. The Spiral Puzzle offers a fresh take on the traditional jigsaw design, featuring edges that spiral into the center. Unlike typical puzzles, where you begin from the outer edges and work inward, the Spiral Puzzle blurs the line between the interior and exterior, creating a uniquely engaging experience.

The puzzle consists of 166 pieces

Bill of Materials

Bambu Filaments

Turquoise

A00-B5-1.75-1000-SPLFREE

19.99 USD

× 1

Beige

A00-P0-1.75-1000-SPLFREE

19.99 USD

× 1

Yellow

A00-Y0-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (48)

@artizv

Print Profile

0.2mm layer, 2 walls, 15% infill

Scale it down to about 60% so i could print it on a1 mini. but this was hard. took couple of days

The profile uploader has replied

@oleksandr_t2l

Oh, you did an incredible job

@L.E.

This puzzle is amazing! i did a similar thing as others and printed with rainbow filament making the pieces double sided so a total of 4 colors for maximum confusion during assembly! the print is so clean and it was mesmerizing watching it print

The designer has replied

@oleksandr_t2l

Oh, thank you for such a great review ☺️

@Crumbelino

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome Puzzle! Love it!

The profile uploader has replied

@oleksandr_t2l

Looks awesome, thanks for the review ☺️

@Crumbelino

Boosted

Replying to @oleksandr_t2l :

Thanks, you're welcome!

@matko

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Those prints sure fill up the whole plate. Some objects will overlap the prime line. If that bothers you, you can nodge the puzzle pieces up a bit in the slicer to avoid it (which I did). Or you could remove the line from the plate if you are fast enough at the start of the print. (I wasn't) 😅 Otherwise puzzle looks nice and I'm looking forward to solve it.

The profile uploader has replied

@oleksandr_t2l

Thanks for the review ☺️

@Zizoumou

Boosted

Thank you so much ! Very good puzzle. The tray is a little bit too large but good for handing the pieces. In my opinion only one thing is missing, a lid.

The designer has replied

@oleksandr_t2l

Thanks 😊

@Wittebal

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

this print is so nice. Also really difficult to solve! The base is a bit too big which is a shame, but apart from that its awesome!

The profile uploader has replied

@oleksandr_t2l

Thanks for the review ☺️

@KaJa

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This is amazing!! Love all of your Puzzles! Thank you so much ❤

The profile uploader has replied

@oleksandr_t2l

Thank you very much for such an incredible review☺️

@user_3794307188

Impossible

The designer has replied

@oleksandr_t2l

Possible 😀

@user_3794307188

Replying to @oleksandr_t2l :

How.... 💀

@user_1486641706

Print Profile

No AMS 0.2mm layer, 2 walls, 15% infill

this is a tricky puzzle that can take hours to complete if you want more of a challenge print both swirls in the same colour

The profile uploader has replied

@oleksandr_t2l

Thanks ☺️

@user_3618033814

Boosted

Great design!

The designer has replied

@oleksandr_t2l

Thanks 😊

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Spiral Vase

MaXiLuPa

1.1 k

1.9 k

15.7 k

Spiral fidget cone

Zabois29

3.4 k

3.2 k

35.7 k

Spiral Vase

lancelotcv

196

369

3.2 k

Spiral Vase

Buzzzz

238

610

6.1 k