Ski and poles holder

Ski and poles holder

Boost
17
51
14

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 4 walls, 15% infill
0.2mm layer, 4 walls, 15% infill
Designer
2.7 h
2 plates
4.8(6)

Open in Bambu Studio
Boost
17
51
14
6
94
68
Released

Description

Simple but effective skis and poles holder.

Designed to hold a pair of skis together, added clamps for holding a pair of 16 mm poles.

Two print plates are provided in the profile, first one has a 10 mm clamp clearance (for thicker skis), second one has clearance of 5 mm (for thinner skis). Pole clamps are the same on both, for 16 mm ski poles.

I have printed and tested the model on a recent skiing trip, and it makes carrying skiing equipment much more comfortable by neatly holding everything together.

From my experience, it is perfectly OK to print in PLA. 

Comment & Rating (14)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 4 walls, 15% infill
Used default settings - clip came out great. Haven't had the chance to fit it yet, since we're using rental ski's ;-) UPDATE: Tried it out, the pole-clips seems a bit tight - pole-diameter unknown by the way. the ski-fit is nice and sturdy. Will also soon check with a known-diameter pole.
The designer has replied
0
Reply
Thanks for the review. Hope it works for you, when you get the chance to use it.
0
Reply
Replying to @Cesinek :
Test conducted. Rating text updated. 😉
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Great! Nice fit!
The designer has replied
0
Reply
Nice. Glad you liked it. Thanks for the review.
0
Reply
This keeps falling off of my kid's skis, perhaps they're too thin. I'll keep trying to use it to see if I get the hang of it.
The designer has replied
0
Reply
Haven't tested it with kids skis, but I would think the tighter one should work. Try to put it close to the bindings and not towards the tips. The skis are thicker in the bindings area. Attached is a photo how I use it.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
The designer has replied
0
Reply
Thanks for the review.
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
The designer has replied
0
Reply
Thanks for the review. Appreciated.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
The designer has replied
0
Reply
Thanks for the rating. Is there anything wrong with the model or the profile? Why only 4/5 rating? Thanks.
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.