Habe ich für meine Vitrine erstellt und wollts hier teilen.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
e Model is 200x112.5mm in size
You may print 
That higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Marine Blue
    At layer #13 (1.12mm) swap to Beige
    At layer #20 (1.68mm) swap to Jade White for the rest.