120mm fan cover with rotating shutter

Copyright Claim

120mm fan cover with rotating shutter

Boost
18
36
2
GIF

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.16mm layer, 4 walls, 20% infill, no supports, ironing
0.16mm layer, 4 walls, 20% infill, no supports, ironing
Designer
4.8 h
3 plates

Open in Bambu Studio
Boost
18
36
2
1
26
4
Released

Description

120mm fan cover with the rotating shutter. This fan cower is very low profile, it's only 4.5mm thick, and it can be easily opened or closed when that is needed. You can use the small tab on the side of the shutter to rotate it 45 degrees in order to open or close the fan cover.

 

I've included 2 versions of the shutter, one with short and one with extended tab. Short tab is completely hidden when the shutter is in open or closed position. Extended tab is a little bit longer and easier to manipulate. You only need to print one of these two. Also I recommend to print the shutter in a different color from the fan cover, that way it will be easier to tell when the cover is closed.

 

Important warning:

If you place this cover in front of the fan always make sure that the fan cover is open if the fan is running, otherwise you may damage the fan because the airflow is completely cut off.

 

Assembly is fairly simple just snap the shutter onto the fan cover. Just pay attention to the orientation of the shutter, side that was on the build plate needs to be pointed away from the fan cover.

 

Distance between the mounting holes is 105mm, so it can be attached anywhere you can mount 120mm PC fan. You can use standard M5x10mm self-tapping case fan screws to attach it.

Boost Me (for free)

If you like the model and/or find it useful.

Bill of Materials

Bambu Filaments
A00-D3-1.75-1000-SPLFREE
× 1
A00-R0-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (2)

Please fill in your opinion
(0/5000)

Boosted
yup
The designer has replied
1
Reply
Thank you for the boost.
0
Reply
No more