TRVZB F5 Fix: TRV Pin Extension (1...3.5mm) x 3mm

TRVZB F5 Fix: TRV Pin Extension (1...3.5mm) x 3mm

Boost
3
2
0

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.16mm layer, 3 walls, 15% infill
0.16mm layer, 3 walls, 15% infill
Designer
15 min
1 plate

Open in Bambu Studio
Boost
3
2
0
0
7
3
Released

Description

This is a set of extension pins for thermostat valves (TRVs), more specifically for Sonoff TRVZB valves.

The TRVZB valves show an F5 error after more recent firmware updates - see here: https://github.com/Koenkk/zigbee2mqtt/discussions/24518

This error can be fixed by choosing the suitable pin from the pins in this file - the pins are labeled 1…3.5 mm, indicating the added lenght for the original pin.

Pin extension snaps onto the original 3 mm pin (hole is ca. 3.7 mm deep).

In my case, a valve with RAVL adapter (provided by Sonoff with the TRVZB) caused the issue - according to the compatibility table Sonoff provides, it's either an Oventrop or Danfoss valve (these are the only valves type compatible with the RAVL adapterI use). The pins on my valve have an OD of 3 mm and the pin extension fits snuggly.

 

Print in PETG (or ASA/ABS) to make sure there is no heat induced deformation!

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.