Jack Sawyer running for endzone by brady.bowling

brady.bowling

Hobby & DIY>Sport & Outdoors

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.08mm layer, 2 walls, 100% infill

Designer

6.5 h

1 plate

4.5(2)

0.08mm layer, 2 walls, 100% infill 168 x 112 for a1 mini

Designer

4.1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

hours to print

This is Hueforge of JackSawter Running To Endzone

Takes 9 hours to print

Project: jack.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240.9x160.68mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Scarlet Red
    At layer #19 (1.6mm) swap to Ivory White for the rest.

ohio

ohio state

ohio state buckeyes

ohio state buckeyes sign

jack sawyer

cfp

Comment & Rating (17)

@A1_mini_

Boosted

Could you make a simple display stand for it please?

The designer has replied

@brady.bowling

i use this Stand for calendars, HueForge, pictures, etc. by LTB2.0 - MakerWorld

@A1_mini_

Boosted

Replying to @brady.bowling :

Thanks!

@A1_mini_

Boosted

Could you try to make a small A1 mini one? ( I will boost if you do!)

(Edited)

The designer has replied

@brady.bowling

its added

@A1_mini_

Boosted

Replying to @brady.bowling :

thks!

@A1_mini_

Boosted

Replying to @brady.bowling :

Sorry I can't boost till I get more. I promise to boost once I get some. :)

@user_957896632

Boosted

As soon as I can figure out how to change colors at different layers I am going to print this. I am still new to the Bambu p1s. It was awesome point of the game and everyone was screaming.

The designer has replied

@brady.bowling

Is real easy slice print then on the slider to the right move to where it says to change layer colors at right click and select change filament then select color then realize and your done