Daryl Dixon HueForge - The Walking Dead
Daryl Dixon HueForge - The Walking Dead
Print Profile(1)
Description
Boost Me (for free)
If you like my models and want to support me, please consider donating a Boost! I would be very grateful!🤗
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White for the rest.
The All-in-One Frame used in photo can be found here (Wall or Stand):
https://makerworld.com/en/models/924027#profileId-886657
Pictured below is a set of The Walking Dead. More to be added…
If you would like to see a character not shown just send me a message!
Links to more TWD
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)