This is a hueforge of Batman Beyond, I did not do the original art and I couldn't find a name to give credit. I just made is 3D.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 200x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 0.2
PLA PolyLite Black Transmission Distance: 4.4
PLA BambuLab Basic Blue Transmission Distance: 2
PLA PolyLite White Transmission Distance: 4.2
This print uses 4 unique filaments
Swap Instructions:
Start with Red
At layer #13 (0.68mm) swap to Black
At layer #25 (1.16mm) swap to Blue
At layer #35 (1.56mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)