The Venture Brothers and Marvel mashup. Brock Samson vs Wolverine!! Go TEAM Venture!!
Project: Brock and Wov - Rev.1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to White for the rest.
Comment & Rating (0)