This is a replacement dust port for the Gen 2 Shaper Origin to allow direct connection to a Cen-Tec Systems Quick-Click vacuum hose (https://www.amazon.ca/Cen-Tec-Systems-94720-Multi-Brand-Collection/dp/B0849MQYF1).

This will also work with the hose included with Fien Turbo II series of dust-extractors - and I believe (although this is untested) the Bosch Click and Clean hoses.

My print profile is setup to print the adapter in PLA-CF using PETG HF for the support interface for the main dust-port (found the overhang ability for PLA based filaments was better) and PETG HF with PLA for support for the suction control ring (the added flexibility of PETG can help with getting the control ring installed on the dust-port). I recommend if you are using a PLA with PETG support (or vice versa) that you increase your flushing volume to a minimum of 600 to ensure a good purge - otherwise you can have layer adhesion issues.

NOTE: Gen 1 Shaper Origins have a different dust port design - so this would NOT be compatible with the Gen 1 Origins.