Battery storage box AAA

Copyright Claim

Battery storage box AAA

Boost
36
74
13
GIF
GIF

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1

0.2mm layer, 2 walls, 6% infill
0.2mm layer, 2 walls, 6% infill
Designer
3.1 h
1 plate
4.9(8)

Open in Bambu Studio
Boost
36
74
13
15
45
34
Released

Description

You also have batteries lying around your house like me.
That's why I designed a battery box that holds 33 AAA batteries.
With each press, 1 battery falls out of the box.

 

Download the version for AA batteries here:

 

https://makerworld.com/en/models/976551#profileId-949506

 

 

Instructions:
1) Place the pins of the rod into the holes in the rotating cylinder


2) Insert the rod with the spring into the upper hole.


3) Lift the lower part of the spring and place it in the position shown in the photo.


4) Insert the rod into the groove


5) Place the rotating cylinder correctly on the pin


6) Close the lid


7) Screw in the screws

 

 

Boost Me (for free)

If you like my model, send me a free boost, you will help me create more models.

Comment & Rating (13)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 6% infill
Really cool! For me this was the first time I've experienced warping, and it warped pretty badly off the build plate. Surprisingly, it still came together and works well since the warping happened at the front.
The designer has replied
0
Reply
hello. for small and thin parts it is very important to have a perfectly clean and degreased plate.
0
Reply
Replying to @MotomaniakMT :
Thank you for the tip!
0
Reply
Replying to @MotomaniakMT :
Thank you for the tips!
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
excellent print.
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
Super fine! Very good qality!
0
Reply
Excellent piece. I printed it with PLA The best part is the tiny screws. I've never printed such small and well-made "M4" countersunk screws before. Printed with a P1S and started from my phone
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
Bery nice project. Easy to print and assemble
0
Reply
Hello Not bad. It would be brilliant if there were a version with AA and AAA batteries in one box
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
I love this design. I've printed 4 of them and also 4 of the aa ones and they all work perfect.
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.