Gastly, Haunter and Gengar on a Log (Hueforge)

Gastly, Haunter and Gengar on a Log (Hueforge)

Boost
13
38
1

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
5.1 h
1 plate
5.0(1)

Open in Bambu Studio
Boost
13
38
1
0
8
1
Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Jessie Premium Purple Ice Transmission Distance: 18
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Purple Ice
    At layer #17 (1.44mm) swap to Sakura Pink
    At layer #23 (1.92mm) swap to Jade White for the rest.

Bill of Materials

Bambu Filaments
A00-K0-1.75-1000-SPLFREE
× 1
A00-W1-1.75-1000-SPLFREE
× 1
A00-P5-1.75-1000-SPLFREE
× 1
A00-P1-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
No more