Designed AUTO locking tweezers

Copyright Claim

Designed AUTO locking tweezers

Boost
597
1357
90

Print Profile(2)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
41 min
1 plate
4.7(61)

0.08mm layer, 2 walls, 15% infill
0.08mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
4.9(21)

Open in Bambu Studio
Boost
597
1357
90
59
1.1 k
708
Released

Description

The tweezers automatically lock when you grab them, and the lock can be released by moving the protrusion.
Only the tip part requires support, but the rest can be printed without support.

 

How to assemble
Just stack the tweezers parts and fit the joining parts, even one joining part will work.


Note

This is a product easily made using 3D printing, so it is not suitable for precision operation. If you require precision operation, we recommend a commercially available metal product.

Please note that if you leave it closed for a long time, the spring will weaken.

 

The filament required for modeling is 12g. 

For 0.2mm Standard, the required time is approximately 40 minutes.

Comment & Rating (90)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.08mm layer, 2 walls, 15% infill
Functions superbly and is highly practical
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
It works well.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good job
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Works great for holding cables and small pieces. If you need more grip, I recommend putting some electrical tape on the inside of the tips.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Hello everyone, these tweezers are quite handy when you need a little extra time for your snack
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed first time and it is an excellent work, thx!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Works well
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Great design! very useful tool, it would be better to add brims to the lock parts. i had to print them separetedly
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
this thing works great!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.