Pokeball V1.0

Pokeball V1.0

Boost
99
219
2

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
5.9 h
4 plates
5.0(1)

Open in Bambu Studio
Boost
99
219
2
3
51
10
Released

Description

I had been wanting to make a Pokeball with my printer for a while, and although I had initially thought of using one of the existing models, this time I wanted to make the model from scratch. I was inspired by several of the existing models on the internet and I share the result I got to.

I must clarify that this model is not completely printed, it needs two 3mm x 1.5mm magnets to operate the button and an 8mm barrel hinge to join the upper part with the lower part. I have used the following:

I recommend printing the outer parts with a 0.1mm layer height. The model is designed so as not to have to paint practically any part (although I have had to).

If you have any questions or problems with the parts, do not hesitate to contact me and I will see how to solve it. Please share your makes!

I really hope you enjoy this model. I also include a base for the exposition of the Pokeball.

Bill of Materials

List other parts
  • 3mmx1.5mm-Magnets x 2
  • 8mm-Hinges x 1

Download BOM

Comment & Rating (2)

Please fill in your opinion
(0/5000)

currently printed this up. I didn’t see the little square stand for it in the print file. is that a separate file?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more