Simple Playing card Box

Copyright Claim

Simple Playing card Box

Boost
103
286
14

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

Tested profile - 0.2mm layer, 1 walls, 15% infill
Tested profile - 0.2mm layer, 1 walls, 15% infill
2.9 h
2 plates
4.7(7)

Open in Bambu Studio
Boost
103
286
14
2
132
91
Released

Description

Please measure if your cards will fit. The 56 cards I use have followfollowing dimensions 57x87x11 mm. If i remember correctly the Box has a volume of 60x90x13 mm. I am sorry to everyone who cards didn't fit, I should'should've put these messuremeasurements here sooner.

 

This Is a simple container for Plying card. I designed it to fit at least 56 cards, but there is still a bit of Playroom. The lid can be attached to the main part with a bit of pressure, and they are then connected until you pull them apart. I haven’t tested it under all circumstances, but it still works after multiple times.  There are 2 Models of the Main part, one with a hexagon Hole and without a hole

I made this model to learn CAD software, it may not be the best of work, but it functions as planned.  

Comment & Rating (14)

Please fill in your opinion
(0/5000)

Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
Prints well
1
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
print is great, but none of my bicycle deck of cards fit.
1
Reply
my cards dont fit in it?
(Edited)
The designer has replied
0
Reply
I am very sorry to hear that. My cards are a dimension of 57x87 mm, and if you use 56 cards z= 16 mm.
0
Reply
Could you send me your dimensions? I noticed that there a different sizes of cards, this is maybe a regional thing. For instance I live in Europe, maybe they are smaller there, but I don't know.
1
Reply
Replying to @Double_U_G :
Poker Size (2 ½" × 3 ½", 63mm × 88mm, ISO 216: B8) Bridge Size (2 ¼" × 3 ½", 56mm x 88mm) looks like you made the bridge size cards my bad. maybe put that in the description or make a larger box for poker cards. i stretched it out on the lid and box and now it fits a full size poker deck and the cardboard box goes in too. thanks for the file. sorry for the previous comment.
0
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
0
Reply
With some slight scaling for a few decks, this box worked perfectly to protect 10 different card decks that were either in tattered boxes or plastic bags. Very nicely done! Printed with PTEG HF and the rigidity of the lid and all is perfect.
The designer has replied
0
Reply
Thanks for the Boost! I am very happy to hear that you were able to use this model even for other cards. And I actually did not think about printing in PETG, it probably is way better than PLA for this one. Thanks
0
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
The top is too thin. When trying to close/open it caved in and broke itself :(
0
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
1
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
0
Reply
Print Profile
Tested profile - 0.2mm layer, 1 walls, 15% infill
0
Reply
No more