6-Shot Disc Shooter by uhltimate

uhltimate

Toys & Games>Outdoor Toys

GIF

Print Profile(24)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.9(1.3 k)

A1 mini,0.2mm layer, 2 walls, 16% infill

2.2 h

1 plate

4.8(199)

all upgrades: easy lever, comfy trigger, 12shot mag

3.3 h

2 plates

4.9(88)

3 Color A1 Mini Updated Trigger 0.2mm layer, 2 walls, 15% infill

2.6 h

3 plates

4.9(70)

Click to see more

Open in Bambu Studio

Boost

3476

6391

2468

1.3 k

17.2 k

18.1 k

Released

Description

Description:

Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!

Features:

Impressive Range: Launch discs with precision over 8 meters.
6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.
Compact and Portable: Take the excitement anywhere with this portable and compact design.

Safety Guidelines:

Aim responsibly, avoiding people, animals, or fragile items.
Always wear eye protection.
Keep the disc shooter out of reach of children.

Some nice add-on parts and modifications:

Mesmerizing Discs with colorized pattern by @BamBam Design https://makerworld.com/en/models/108108#profileId-115446
Magazine Extension - 12 Shots by @BamBam Design https://makerworld.com/en/models/109578#profileId-117052
Easy load handle by @madizmo https://makerworld.com/en/models/102564#profileId-109231

Printing Tips:

“set wall loops to 6 for the spring !”

(or more ;-)

Choose a durable filament for longevity.

Ensure precise calibration for accurate dimensions.

Print Orientation for the Frame (no Support required)

cutaway model (Assembly aid)

Disclaimer: This model is compatible with the Maker's Beginner Kit B-ZC002. The kit includes various non-printed parts to accommodate multiple popular models. As a result, some parts may not be necessary for this specific model. If you only need to purchase the non-printed parts required for this model, please uncheck the Kit option when making your purchase.

Bill of Materials

Maker’s Supply Kits and Parts

100PCS 1.4x20mm Basic Rubber Bands - RA002

$1.19 USD

B-RA002

× 1

Maker's Beginner Kit - ZC002

$9.99 USD

B-ZC002

× 1

Buy Now

Download BOM

Comment & Rating (2468)

@RPDesign

Magazine for 40 pieces of the disks my boy loves it

@Maddox_3Dprints

where can I find that

@DDKnight

Replying to @Maddox_3Dprints :

Look under the profile

@DDKnight

Replying to @Maddox_3Dprints :

https://makerworld.com/en/models/153803#profileId-168075

@Charge

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

What a fun little build! and it works fantastic! Very fun print! Good job on designing!

@CarloM

Boosted

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

Very excellent! No defects, perfect print, works perfectly!

@ST.ask

Bro can you tell me what parameters what material and what printer you used to print this?The surface is perfect！

@CarloM

Boosted

Replying to @ST.ask :

Materials: BBL PLA Matte (Charcoal) for the gun, BBL Basic PETG (Gray) for the mechanism and discs Setting: 0.20 mm Standard BBL (except 3 wall loops, sparse infill 20%)

@ST.ask

Replying to @CarloM :

Ok thanks a lot!By the way, BBL is short for Bambu Lab?The original Bambu Lab material is used, right?

@NicDaddy

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

I printed using PLA Metal and on default settings. Unfortunately I also kept supports on which they were very difficult to remove inside the handle. I reprinted another handle later to see the difference and supports are definitely NOT required. They function awesome! I used a larger rubber band and doubled it down to make it fit. When I put the filament inside the hinge area I also used a torch to melt the ends and basically rivet the filament to the side of the handle. It's removable still.

@APizzaGod

Boosted

I would use a 3d pen to seal the filament in the hole. (if you have one)

@NicDaddy

Replying to @APizzaGod :

I just used a lighter to melt the end a bit and then pushed on it like a metal rivet on a truck frame.

@blake6548

Replying to @APizzaGod :

I thought the same thing.

@dlordcletus

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

This printed great the first time. All of the prices fit together with no sanding or adjustment needed. printed in a PLA+ glow filament so it should be easy to find the disks at night!

@ivryshapira

Amazing print works perfectly.

@thrutheframe

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

A really fun toy. Easy to print and put together. Though my better half was not too keen about me shoot little disc around the house. 😂 Really fun to play and would give 6 stars if it was ever available.

@zumube

Boosted

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

einfach genial 👍

The designer has replied

@uhltimate

Danke

@oddness_kookier

What filament @zumube ?

@zumube

Boosted

Replying to @oddness_kookier :

Bambu PLA Metal

Show original

@cagneycarnation

Boosted

Print Profile

[For Maker's Beginner Kit] 0.2mm layer, 2 walls, 15% infill

Super cool design. This thing is super fun to play with multiple people. It's also fairly accurate and has a good range. If I had one criticism it would have to be the claw witch can broke many times for me with PLA. PLA+ works best based on my experience.

The designer has replied

@uhltimate

yeah thats true, i build a testbench for those and i think i found a better shape now. I still want to do some Testing but an update will come next month.

@Muffin10068

Replying to @uhltimate :

what rubber band fits well? printed it (sadly with supports) and the rubber band kind of restricts it from shooting.

@magno

Boosted

can you please share the design for that trigger, can't find it

@martenh

Boosted

Print Profile

3 Color A1 Mini Updated Trigger 0.2mm layer, 2 walls, 15% infill

Some artifact striping in the print and next disk doesn't slide down in place completely despite tight rubberband. Apart from that nice design and shoots nicely.

The designer has replied

@sulleyneal

Not sure what to tell you on that. Mine printed super cleanly.

@martenh

Boosted

Replying to @The account has been deleted :

PETG for the handle and trigger, PLA for the red parts.

@Sleeper

Replying to @martenh :

what seam setting did you use? I would say try calibrating your filament if you don't have an X1 and in your filament profile turn on retraction and wiping when change layer. This looks like a printer calibration or slicer setting issue, not the model.