Fibonacci Squares | Articulated & Print-in-Place by ERAVIA

ERAVIA

Education>Mathematics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

Standard | 0.20mm Layer, 2 Walls, 10% Infill

Designer

13.6 h

3 plates

4.7(3)

Mini | 0.20mm Layer, 2 Walls, 10% Infill

Designer

7.5 h

3 plates

5.0(1)

Open in Bambu Studio

Boost

149

Released

Description

FIBONACCI SQUARES

The Pattern of Life

1 • 1 • 2 • 3 • 5 • 8 • 13 • … • ∞

Mysterious Fibonacci Sequence in a Square Form

Available in Curve, Hollow, and Solid Styles

Print Instructions & Recommendations

It is a print-in-place model with an articulated feature.
No support or any other post processing is needed. Just print, play, and explore!
The clearance of the squares at the joints is more than 0.20mm which is plenty for the movement. However, should you experience any problem, feel free to scale the model up.

Model Information

Dimensions (X-Y-Z) | Standard: 210 x 130 x 20~21 mm
Dimensions (X-Y-Z) | Mini: 130 x 79.5 x 20~21 mm
Commercial Use: Terms and conditions are available on Patreon.

ENJOY!

Boost Me (for free)

Your support means a lot. Boosting the models goes a long way in helping me create and share more with you!

Comment & Rating (12)

@biggscorey

Print Profile

Standard | 0.20mm Layer, 2 Walls, 10% Infill

looks good but a little loose on some parts

@ERAVIA

Thank you for the feedback! Actually, it was designed to be loose for easy movement. May I ask how it can be improved in your experience? Any suggestion is greatly appreciated.

@biggscorey

The only ones that were a little loose were the 1 blocks. They wiggle a good amount. other than that it’s good! If you could make a fidget Fibonacci sequence in some sort of spiral that would be amazing!

@ERAVIA

Replying to @biggscorey :

Oh, sorry to hear that. Thanks for printing it anyways! Fidget Fibonacci sequence sounds like an interesting project and I say why not! :) I will see what I can do.

@Qianyi_Shan

Boosted

I just have to give someone who made the Fibonacci sequence a boost. great, will print

The designer has replied

@ERAVIA

Thank you for the support!

@SSSStryker

Print Profile

Standard | 0.20mm Layer, 2 Walls, 10% Infill

@ERAVIA

Thank you!

@jirin

Print Profile

Mini | 0.20mm Layer, 2 Walls, 10% Infill

@ERAVIA

Thank you for the rating!

@user_1421458416

Print Profile

Standard | 0.20mm Layer, 2 Walls, 10% Infill

@ERAVIA

Thank you for the feedback!

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.