Story
Taking a break from the Super Hero Genre for a bit and adventuring out to new frontiers. Taking a stab at scenery capturing. What better way to start than capturing the famous Hogwarts Castle as a backdrop:
Harry Potter Hogwarts Castle Diagon Alley
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Gold Transmission Distance: 5
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Brown
At layer #11 (0.96mm) swap to Gold
At layer #13 (1.12mm) swap to White for the rest.
To become an Authorized Seller of any of my works, please visit my Patreon page to obtain a Merchant License. https://www.patreon.com/3djdprints
Boost Me (for free)
Thank you for the support.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)