Case Steam Engine and Barn
This was inspired by what I would consider a local event where old farming traditions are celebrated at a yearly event. You can see my other Tractor Barn Series under my profile.
The frame for this Hueforge is created by Canadian Gamer and is located here" “https://makerworld.com/en/models/381229#profileId-281475”
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Dark Green Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 5
This print uses 8 unique filaments.
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Dark Red
At layer #6 (0.56mm) swap to Dark Brown
At layer #7 (0.64mm) swap to Black
At layer #8 (0.72mm) swap to Dark Green
At layer #9 (0.8mm) swap to Gray
At layer #11 (0.96mm) swap to Silver
At layer #12 (1.04mm) swap to Dark Red
At layer #14 (1.2mm) swap to Yellow
At layer #19 (1.6mm) swap to Ivory White for the rest.
If you chose to resize the image, only change the X and Y value and not the Z axis as this will change the color sequence and change the final product results.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)