Washi Tape Pegboard Shelf Organizer

This model is a shelf designed to be hung on a pegboard or Skadis wall to organize Washi tape or other small rolls of tape.

Sizing (Pegboard)

The model has pegboard mounts that are 8 inches (203.2 mm) apart. If you need different spacing for your pegboard let me know in the comments and I will add it as an option. Additionally if you want a different sized shelf (the current one is 9 inches or 228.6mm long) let me know in the comments and I will add it.

Sizing (Skadis)

The model has Skadis mounts that are 200 mm (7.87402 inches) apart. If you need different spacing for your Skadis board let me know in the comments and I will add it as an option. Additionally if you want a different sized shelf (the current one is 9 inches or 228.6mm long) let me know in the comments and I will add it.

Supports

The current designs does not require any supports. The mounts can result in slight imperfections when printing depending on the filament type used due to the steep angle, but I have included tolerances in the hole size to ensure it will still fit.

Durability

The mounts are slightly fragile (they will break off if you tug on the shelf hard) but they have no problem holding the weight of the shelf and all the tape rolls.

Versions

There are three print profiles:

1. With pegboard mounts
2. With Skadis mounts
3. Without mounts (if you want to add your own mounts or have it lay flat on a table)

Support Me

(or you can Buy me a Beer)