Floater Planter with plate
Floater Planter with plate
Print Profile(2)
Description
Minimalist planter design made of several torus with variable diameter.
There is also a version with solid bottom (without the plate) available here:
https://makerworld.com/en/models/951711#profileId-919793
And the Snack Bowl here:
https://makerworld.com/en/models/973950#profileId-946227
It is sized for the A1 mini.
Inner diameter of full scale model (olive green in the photos) is 120mm, which together with height of 118mm gives you around 1.3L of volume.
Scaling it down to 90% (gray in the pictures) results in approx. 0.9L of volume.
Printed with generic PLA:
- 0.4mm nozzle
- 0.2mm layer height
- 7% gyroid infill (planter) and 15% (plate)
- 3 walls
Note: all photos are actual printed model and are copyright protected
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)