Japanese style lantern LED tealight cover

Copyright Claim

Japanese style lantern LED tealight cover

Boost
241
587
28
GIF

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
7.7 h
3 plates
4.9(13)

Open in Bambu Studio
Boost
241
587
28
33
198
91
Released

Description

I originally designed this for a custom doll named Akino, and always wanted to have some of these lanterns around, just never got to it.

 

I redesigned the lamp to fit the tealight from the Maker Supply, which also comes in the beginner kit. The mechanism for inserting the light was changed to a screw based one, so that the height of the light can be adjusted as well.

 

I added a printable diffuser (two .4 walls thick), but you can easily make one with paper as well.

 

I think it would also look cool in marble filament!

 

Assembly is straight forward: insert the diffuser into the main body, top it with the cap (a little glue in there will help it stay on), put your tealight on the plug, perhaps with a little bit of blue tack and screw in from the bottom.

Bill of Materials

Bambu Filaments
A16-K0-1.75-1000-SPL
× 1
A01-W2-1.75-1000-SPLFREE
× 1
A05-Y4-1.75-1000-SPL
× 1
Buy Now
Download BOM

Comment & Rating (28)

Please fill in your opinion
(0/5000)

I love this so much!!
GIF
The designer has replied
3
Reply
Thanks for posting a make!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
amazing print, super smooth and looks great. 😊
The designer has replied
2
Reply
Thank you so much for posting with photo! Looks awesome
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Awesome!
The designer has replied
1
Reply
thanks for sharing!
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Looks amazing. No printing issues.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
love these! thank you for this beautiful printed. I printed it in bambulab wood pla
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
very pretty
1
Reply
Boosted
I love this design so much. The only problem I have is that it is slightly annoying to have to unscrew the bottom each time you want to turn it off or on.
The designer has replied
1
Reply
Thanks, and I agree! When I made it, it was for a one-off photoshoot so I wasn't making it with the intention to use it often. you can try it with a the remote controlled tealights too ;) then you won't have to unscrew it all the time.
0
Reply
Boosted
Had some issues with the overhangs with matte Bambu PLA but I love it regardless. It is incredibly pretty!
(Edited)
The designer has replied
1
Reply
I tried to design it in auch a way to mitigate problems with overhangs, but the top/roof comes out blobby regardless of what I tried ;) I sanded my print down a bit and hit it with a torch to re-melt the plastic and remove the matte appearance. Thanks for the boost!
0
Reply
Nice!
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
As in my Boosted post --> Awesome design, just don't hurry up and glue top prior putting interior, or You will struggle with putting this inside through bottom cap.
1
Reply