Boost Me (for free)
The Model is 155.27x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Dark green Transmission Distance: 1
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Gold Transmission Distance: 5.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark green
At layer #10 (0.88mm) swap to BambuLab Green
At layer #12 (1.04mm) swap to Gold
At layer #17 (1.44mm) swap to Brown
At layer #20 (1.68mm) swap to Red
At layer #23 (1.92mm) swap to Jade White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)