The Poke Clicker

The Poke Clicker

Boost
28
69
6

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

V2 changed the tolerances a bit and added a rectangle core
V2 changed the tolerances a bit and added a rectangle core
Designer
2 h
3 plates
5.0(2)

0.16mm layer, 3 walls, 10% infill
0.16mm layer, 3 walls, 10% infill
Designer
1.9 h
3 plates
5.0(1)

Open in Bambu Studio
Boost
28
69
6
9
43
32
Released

Description

The Poke Clicker. The iconic Poke Ball now with a functioning fidget button! I designed this model off of my Poke Ball model. This is a multi part design so no need for an AMS. Everything is snap fit so no need for any glue. Of course you could glue it if you never want to take it apart. Reminder this model does use keyboard switches.

The switches I use are here

Please check out V2 in the profiles. Has better tolerances and a rectangle core for easier assembly(only goes in one way)!

If you enjoy this model please feel free to like, comment, and boost. Hope everyone enjoys  

Comment & Rating (6)

Please fill in your opinion
(0/5000)

Boosted
I’m happy to discover that this model existed because it’s a good idea to make into a clicker! I love that you don’t need an AMS to print. Placing the hex was a bit of a challenge because I kept getting it stuck at the wrong angle. The only issue I have now is keeping the black ring in place because that seems to pop out occasionally. Otherwise, it’s a great model! Thank you for sharing!
The designer has replied
1
Reply
Thanks for the feedback! I went with a hex because that's what i use in my poke ball model. I might redesign for easier assembly on this model. Is the black ring you speak of the center or the button ring? I've made a few for the kids and haven't ran into that issue yet.
0
Reply
Boosted
Replying to @LT_Designs :
Yes the black ring around the button. I heard it snapped in, but ours is gone and now that piece is missing. (I am going to print another piece and my solution was to glue it.) It could be just my luck, but I wanted to let you know.
0
Reply
Print Profile
0.16mm layer, 3 walls, 10% infill
Printed 2 from the app and the result is great, a little hard to assemble because everything fits tight but this is a good thing 'cause the Ball is soldi. Really Thanks for sharing
1
Reply
Boosted
Print Profile
V2 changed the tolerances a bit and added a rectangle core
awesome print! the kiddo loves it! thanks and great work!!
1
Reply
Print Profile
V2 changed the tolerances a bit and added a rectangle core
Great design and easy to print
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.