Design Watch Stand - NO AMS NEEDED by The Big Greek

The Big Greek

Tools>Gadgets

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 10% infill

Designer

1.4 h

2 plates

5.0(144)

Single Color - 0.2mm layer, 2 walls, 10% infill

Designer

1.1 h

1 plate

5.0(46)

0.16mm layer, 2 walls, 10% infill

Designer

2.4 h

2 plates

5.0(45)

AMS Required 2 colour version

3.7 h

1 plate

4.8(4)

Open in Bambu Studio

Boost

1097

1899

301

279

2.2 k

1.4 k

Released

Description

DESIGN WATCH STAND - NO AMS NEEDED

*** UPDATE 09-01-2025 ADDED SINGLE COLOR VERSION ***

I would like to introduce you to my designer watch stand.

This quick-to-print design watch holder with a honeycomb pattern is the perfect display for your watch.
Whether narrow or wide - any clock up to 50 mm in diameter will find its place. A real eye-catcher for any sideboard or shelf.

They are easy and quick to print and you can never have enough of them :-)

There are notches on the underside so that you can insert rubber stoppers so that the stand does not accidentally slip out of place.

These should be 8mm x 3mm in size.

You don't need an AMS for this one. Just print all the parts, stick them together and you're done.

Please print these as on the printing plate so that you get a good result.

Don't forget to calibrate the printer and filament for optimum results

A layer height of less than 0.2mm is not recommended.

The filaments I use are listed

It works great for me.

Boost Me (for free)

IF YOU LIKE IT - BOOST IT

If you like my work/project consider supporting me with these options:

leave a like
leave a comment
download the file
or buy me a Coffee
check out my Patreon Page!

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

If you wish to sell the physical 3D prints of my designs commercially

• Obtain a Commercial Licence

Have fun printing

TBG

Bill of Materials

Bambu Filaments

Charcoal

A01-K1-1.75-1000-SPLFREE

19.99 USD

× 1

Mandarin Orange

A01-A2-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (301)

@oldgeek1111

Very well designed. The small parts fit perfectly, no glue needed and on the bottom little holes for silicon or rubber feet. Nice Job!

The designer has replied

@TheBigGreek

thank you, but you should have printed it lying on its side, like in the profile, then the quality would have been better

@oldgeek1111

Replying to @TheBigGreek :

OK thanks.

@3D.Dragos.moon

Print Profile

0.2mm layer, 2 walls, 10% infill

Gorgeous design and five star printing! Thanks for posting your work! 💫💫💫💫💫

@TheBigGreek

thx for that comment 😊

@3D.Dragos.moon

Replying to @TheBigGreek :

With pleasure! ☺️ You deserve so much more! 🙏

@user_1322410605

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Superb design, the print was quick and easy The pattern printed flawlessly It serves its purpose exceptionally well and is one of the most beautiful watch holders I have found Thank you for uploading 👍

Show original

@TheBigGreek

Thank you for that

Show original

@Lost_Dingo

Boosted

Definitely gets my boost! Beautifully done, highly recomommended. Bracelet watch rests perfectly. Curious if anyone has printed in TPU for a more gentle plastic?

@user_3811317092

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

A truly exquisite model. Prints well, and the colored parts fit perfectly. The design is also elegant. Top-notch.

Show original

@TheBigGreek

Vielen Dank

@user_1613621015

Print Profile

0.16mm layer, 2 walls, 10% infill

This is 🌟🌟🌟🌟🌟🌟 6-star work by the designer! I printed on one plate with Bambu translucent green PETG for the body and Basic Red PLA for the accents. The designer’s use of surface pattern is one of the best I have seen. I used a flashlight to show the beauty of the PETG 3in this Print, but I am considering mounting a small self-contained LED, such as the guts of a tealight.

@TheBigGreek

thx alot

@Norkius

Print Profile

0.2mm layer, 2 walls, 10% infill

Great model, thanks!

@user_1021449265

This is fantastic, a wonderful model – thank you for this The design looks truly excellent and suits both watches

(Edited)

Show original

@ceo51378

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Excellent print. Excellent design. 👍

@TheBigGreek

thx 😊

@SoftWareCrash

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Beautiful design, unfortunately unsuitable for short bracelets as it must remain open, also watches tend to slide down

Show original

@TheBigGreek

Elegant, the "solberne" fits perfectly

Show original

@RevDrX

Print Profile

Single Color - 0.2mm layer, 2 walls, 10% infill

No issues, works as expected and printed perfectly.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Phone Stand (No AMS needed)

Reckit

1.5 k

3.5 k

20.9 k

AMS Stacking System

Jaxel

2.6 k

3.8 k

12.7 k

Apple Watch Charging Stand

Dan_ID

1.8 k

2 k

14.9 k

BENCHY

JayRay

322

4.5 k

164.7 k