Raspberry Pi 7-inch Screen and 4B Case

Copyright Claim

Raspberry Pi 7-inch Screen and 4B Case

Boost
9
18
0

Print Profile(0)


Add the first print profile to earn points

Boost
9
18
0
0
10
0
Released

Description

Content has been automatically translated.
Show original

An enclosure for the Raspberry Pi official 7-inch touchscreen and the 4B. A vented top cover can be printed when using a PoE+ expansion hat. A riser can also be printed when using taller header pins.

No support structure is included as the Raspberry Pi itself provides sufficient support for the screen.

 

Four small holes in the cover are for standoffs, and two larger holes are VESA mounting points.

 

Test print parameters used were five top/bottom/perimeter layers, 15% infill, 0.2mm layer height, 0.4mm nozzle, and PLA filament.

The screen enclosure requires extensive support and overhangs; for aesthetic reasons, it is recommended to place supports on the inside.

 

In addition to the enclosure, a small component is provided to connect the Raspberry Pi and screen via pogo pins, enabling screen power without using GPIO pins.

PCB fabrication files (Gerber) are available for download. Two 5mm shortened pogo pins and a 5-pin female DuPont connector are required.

 

Note: This is compatible with the first generation Raspberry Pi official 7-inch touchscreen, but not the second generation.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more