TILT PHONE STAND by Matthew Ghost

Matthew Ghost

Tools>Organizers

Print Profile(8)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

4.5(381)

0.2mm layer, 2 walls, 12% infill,spiral filling

3.5 h

1 plate

4.6(88)

0.2mm layer, 2 walls, 15% infill

3.1 h

1 plate

4.4(18)

0.2mm layer, 2 walls, 15% infill

4.1 h

1 plate

3.9(15)

Click to see more

Open in Bambu Studio

Boost

1261

2142

547

7.6 k

5 k

Released

Description

NEW IMPROVED VERSION TILT PHONE STAND V4.0 🥳

The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.

Designed for printing completely without supported!
You will need glue (Superglue for plastics). It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.
Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.
Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.

Comment & Rating (547)

@user_2485062206

Doesn’t work at all The phone just falls off because of The weight

@glamdr1ng

perfect print but i dont get the meaning of left hand side gear. it falls off

@desertwhale

Glue that loose gear to the rod+gear after inserting it into place.

@DarkJosh

Print Profile

0.2mm layer, 2 walls, 15% infill

funguje parádně. konečně mám u barvení kam si postavit telefon

@jojo_w16_

wirklich tolles Teil nur leider kippt der Ständer leider immer nach hinten um wenn ich das Handy hochkant hinstelle

@Myron_Yuskovych

Best phone stand

@dani.af204

Print Profile

0.2mm layer, 2 walls, 15% infill

Waiting for a version print in place.

The designer has replied

@MatthewGhost

I already have such a version :) https://makerworld.com/en/models/415150#profileId-317228

@user_3555616530

Perfect, Love it Tnx

@PJames85

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice, I had to glue 1/2’s together, I think because I used a .8mm nozzle.

@Lebro22

Print Profile

0.2mm layer, 2 walls, 12% infill,spiral filling

Works very well good sir

@sika4ever41

eine tolle Datei. das einzelne kleine Rad habe ich angeklebt da es sonst immer abgeht. es klappt sehr gut und sieht auch klasse aus auf dem Tisch.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.