Cute Knitted Elephant by TreeD-prints - MakerWorld

IP Report

Print Profile(5)

All

P1S

P1P

X1

X1 Carbon

X1E

A1

A1 mini

120mm high, 2 plates, 0.12mm layer, 2 walls, 5% infill

120mm high, 2 plates, 0.12mm layer, 2 walls, 5% infill

Designer

11.2 h

2 plates

4.9(193)

75mm high, 2 plates, 0.08mm layer, 2 walls, 7% infill

75mm high, 2 plates, 0.08mm layer, 2 walls, 7% infill

Designer

7.4 h

2 plates

4.8(76)

no ams_0.16mm layer, 2 walls, 7% infill

no ams_0.16mm layer, 2 walls, 7% infill

2.8 h

1 plate

5.0(42)

75mm, 1 Plate (printbyobject), 0.08mm layer, 2 walls

75mm, 1 Plate (printbyobject), 0.08mm layer, 2 walls

6.8 h

1 plate

4.6(11)

Click to see more

Open in Bambu Studio

Boost

2565

5000

517

503

5.7 k

2.5 k

Released

Description

Hi guys, enjoy my knitted Elephant model available as multi-color print on separate plates. The eyes are printed separately and then can just be glued on. This uses quite less filament. As always feel free to add additional print profiles if you have nice ideas.

As some people were facing problems with the trunk breaking off, I embedded the trunk now quite much in the support which should solve the issue. Be careful when changing the print settings and e.g. making the support thinner around the trunk!

Prepared print profiles include height of 75mm.

If you are interested in selling prints of my models, check out my Patreon: https://www.patreon.com/c/treedprints

Check out my fridge magnet version of this model here: https://makerworld.com/en/models/935400#profileId-900157

Also check out my other models here: https://makerworld.com/en/@TreeDprints/upload

Boost Me (for free)

If you would like to support me, feel free to give me a boost!:)

Comment & Rating (517)

Boosted

The trunk keeps falling off its supports around layer 540 on the 75mm tall version. The model itself looks nice but I haven’t been able to get it to print successfully yet.

The designer has replied

0

Reply

Thank you very much for the feedback! I didn't know about this issue and had no problem so far... I'll try it for myself again and let you know!

0

Reply

Boosted

Replying to @TreeDprints :

It could be due to me printing it on a bed-slinger (A1). Perhaps it just needs a tad more support in that area.

0

Reply

Replying to @goldsam328 :

I print it on a A1 mini now then we‘ll see:)

0

Reply

@user_2270981190

Is the new model posted here? I tried to print twice but both times the trunk broke off. Just now I confirmed that it broke at layer 539. I don't think I see a new version with more trunk supports...

The designer has replied

0

Reply

Thank you for your question! I just update the printing profile files in the same profiles as before. If you download it and open it you should see that there's a support on the front of the trunk (see image) that is not visible in your print. So it was not yet the latest print profile. Really sorry for the inconvenience! Feel free to give it another try!:)

0

Reply

@user_2270981190

You don't need to apologize! This model is great, so cute! Thank you so much for being so responsive. This updated design has surpassed layer 539 and so far is looking good!

1

Reply

Replying to @user_2270981190 :

Thank you for the kind words!:) And glad to hear that it works now!:)

0

Reply

Boosted

Print Profile

230mm high, 2 plates, 0.16mm layer, 2 walls, 5% infill

230mm looked cool. young niece loved getting a rainbow elephant gift.

3

Reply

awesome! Do you have a picture? I'm really curious to see the 230mm in rainbow filament:)

0

Reply

Boosted

Replying to @TreeDprints :

just added it.

0

Reply

Replying to @snarky_answer :

boah looks awesome!

0

Reply

somehow his trunk didn’t print at the support? using A1 with Ams lite. any ideas?

The designer has replied

1

Reply

hmm weird... Did it not print at all or did it break off and fell somewhere?

0

Reply

Replying to @TreeDprints :

found it broken off and on the floor just now.

1

Reply

Replying to @MGoBlueMaker :

I had the exact same problem, I glued it on and used a bandage to cover it up, it looks pretty cute :)

1

Reply

The trunk broke off while printing, I patched it up with a band-aid, and I think it looks even better 😊

The designer has replied

2

Reply

that‘s THE way to deal with problems💪🏻 sorry that happened! I haven‘t heard from the trunk problems for a long time now so I assume it‘s just a negative outlier😅

1

Reply

@user_3303291205

Haha! I actually like this better than the original!

Show original

1

Reply

@arismelachroino

Nice model. May I ask, how did you make this knitted look?

The designer has replied

1

Reply

Thank you very much! I did it with textures in Blender:)

2

Reply

@arismelachroino

Replying to @TreeDprints :

Thank you!

0

Reply

Replying to @arismelachroino :

welcome and all the best on your printing journey!:)

0

Reply

It's super cute. I had the trunk break off after the new update, but I'm still giving it a thumbs up. It's only the second thing I've ever printed though, so it is probably user error. It still looks great even with half a trunk. Elegoo Neptune 4 pro. 7% infill, gyroid fill.

The designer has replied

0

Reply

sorry to hear! What kind of printer and slicer was it? The supports look different than how I "painted" them, so probably that's the reason that the mechanical stability was not granted

0

Reply

Replying to @TreeDprints :

printer: Elegoo Neptune 4 pro Slicer: Cura I'll probably try to print it again after I get some more experience under my belt. I probably didn't have the right support option clicked. Thanks for making it. I downloaded some of your other designs and look forward to printing them. Just gotta finish my deadpool helmet first.

0

Reply

Replying to @iceman341 :

Hmm I see. Just make sure that the trunk is stabilized from the front and the back so it is stabilized from both sides. The support should anyways come off pretty easily so for the elephant it's better to overstabilize a bit:) The other designs should work fine as they are less error prone!:)

0

Reply

Printed perfectly with the fastest profile. The supports almost lift off by themselves. I wanted to give the ka profile rating but I don't understand why it won't let me do it. A1 mini

The designer has replied

0

Reply

Indeed looks great! What do you mean by fastest profile - which one you using exactly?:) Maybe the rating does not work because I switched out the print profile today as some people had problems with the trunk and you were using this profile:)

1

Reply

Replying to @TreeDprints :

The print profile is that of 2 hours of another user, however I like it a lot, I will also print the larger models

0

Reply

Replying to @YahooJAPAN :

Ah okay, thank you! Sounds great, go for it!:)

0

Reply

Print Profile

120mm high, 2 plates, 0.12mm layer, 2 walls, 5% infill

printed great 👍

2

Reply

awesome!

0

Reply

@PrettyFlyPrints

Fun little print. Turned out great. Supports came off well. Some minor deburring and lighter burn cleaned up the sharpish edges from the raft and support.

The designer has replied

2

Reply

looks great!

0

Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Knitted Elephant Mother & Baby (No3)

Knitted Elephant Mother & Baby (No3)

10

174

241

Knitted Cute Dinosaur

Knitted Cute Dinosaur

31

353

411

Cute Knitted Elephant

Cute Knitted Elephant

ThreeDimensions

4

80

69

Knitted Elephant

Knitted Elephant

12

292

392