Desktop Basketball

LayerSlayer
Toys & Games>Other Toys & Games
Copyright Claim

Desktop Basketball

LayerSlayer
Boost
524
817
56
GIF

Print Profile(4)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
0.2mm layer, 6 walls, 25% infill - IMPROVED
0.2mm layer, 6 walls, 25% infill - IMPROVED
Designer
3.1 h
2 plates
4.0(22)
0.2mm layer, 6 walls, 25% infill - IMPROVED (NO NET)
0.2mm layer, 6 walls, 25% infill - IMPROVED (NO NET)
Designer
2.9 h
2 plates
5.0(3)
0.2mm layer, 6 walls, 25% infill (NO NET)
0.2mm layer, 6 walls, 25% infill (NO NET)
Designer
2.3 h
1 plate
3.5(2)
0.2mm layer, 6 walls, 25% infill (WITH NET)
0.2mm layer, 6 walls, 25% infill (WITH NET)
Designer
2.3 h
2 plates
2.5(4)
Open in Bambu Studio
Boost
524
817
56
32
913
423
Released

Description

***Please use "IMPROVED" print profiles***

Updated version based on my original model. This model has the following improvements:

  • Improved Launcher
  • Larger Ball
  • Separated Hoop
  • Minor Visual Updates to the Base, Backboard, and Pole
  • Added Net (Optional)

Assembly:

  1. Insert the launcher into the base (with the thicker end facing down).
  2. Insert the pole into the backboard until the board reaches the notch.
  3. Assemble the ball by inserting the rectangle connector into each half of the ball.
  4. Assemble the net by attaching each link into 7 sets of 10 links. The top of each chain should attach to the top of the net on one end and the small ring on the other.
    1. These can alternate between colors as shown in the pictures.
    2. The first plate has 41 links and the second plate has 31 links so there should be 1 extra!

     ** Optional: Color in the indentations on the backboard and base with a sharpie to get more color.**

 

I'd love any feedback and thank you for your support!

baskeball
desktop
toy
game
hoop

Comment & Rating (56)

Please fill in your opinion
(0/5000)
@SAWY3R
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED
great print
1
Reply
@TeaRexHD
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED (NO NET)
Very cool!
Show original
1
Reply
@user_725159612
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED
Very fun, I made it to give as a gift to a friend of my young son and I'm thinking of making one for my office, LoL. The only laborious part is linking all the chain sections; I found it easier to make sets of two links and then join them. Although I considered making the board in two colors, I ultimately opted for the simpler and more convenient option of painting it with a fine-tipped permanent marker.
Show original
1
Reply
@fredericr
Boosted
Thank you for this lovely model which prints perfectly Indeed, some assemblies are a little tight (low tolerance) but I prefer to have to use a small file rather than finding after printing that some parts do not hold correctly Many thanks to you and a very happy new year
Show original
1
Reply
@soulrebel79
Boosted
Printed with Bambu basic white pla on the x1c, the pieces didn't want to insert together.
The designer has replied
0
Reply
@3Deez_Nuts
what peices don’t fit?
0
Reply
@soulrebel79
Boosted
Replying to @3Deez_Nuts :
Basically the "poles" don't fit in the holes. Nothing can be assembled. I just hit the print button from my phone and didn't change anything. so I'm not sure what's up.
0
Reply
@3Deez_Nuts
Replying to @soulrebel79 :
Okay, thank you for the feedback! I’ll need to increase the tolerance in the holes.
0
Reply
@user_4029405885
amazing
0
Reply
@Nov_qzzp
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED (NO NET)
1
Reply
@Esc.ape
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED
0
Reply
@user_1818939533
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED
A lot of things print off and very difficult to assemble, even with improved version
The designer has replied
0
Reply
@3Deez_Nuts
Thanks for the feedback. What parts didn’t print right for you?
0
Reply
@user_1818939533
for the thing you shoot the ball with the hole and area around it was messed up. The hole to get the backboard on the pole was also to small
1
Reply
@user_1818939533
it worked out in the end though
1
Reply
@ltyler
Print Profile
0.2mm layer, 6 walls, 25% infill - IMPROVED
the launcher prints wrong without supports but the ball prints wrong with supports so adjust before printing
The designer has replied
0
Reply
@3Deez_Nuts
The print profile shouldn’t need supports. What printer are you using?
0
Reply
@ltyler
Replying to @3Deez_Nuts :
With the A1M the hangover on the end of the launcher piece wasn't printing right. Everything else was good so I reprinted it on the next plate with the ball except I added supports and that worked good except I realized it messed up the inside of the ball. I think maybe the rounded side is too steep
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Basketball Hoop

Basketball Hoop

SY135
2
1
0
Basketball Nike planter

Basketball Nike planter

Cedric Cruyt
3
113
60
Basketball Stand

Basketball Stand

Sammy_Machinist
0
1
0
Fidget Cube: Basketball

Fidget Cube: Basketball

austinvojta
2
6
10
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld