Here's a 4 soda-stream cartridges vertical holder. After rearranging some furniture, we were left with our sodastream co2 cartridges, and laying them on the tablet was quite wasteful. So I designed this nice holder to keep them vertical. I had a lot of fun designing it!

If the feet are too large for you, there's an alternative plate in the main print profile that removes the extra feet 🙏

Warnings:

• This is a long print (20+ hours), using 400+ grams of filament! Plan accordingly.
• There's a ton of 8mm hexagons, make sure your filament is extra dry before starting (especially with PETG). Otherwise you'll get some stringing which won't look nice.
• The print is 249mm high, so make sure you set your printer's max Z-Jump height to 250mm instead of 249. This is set for you in the 3mf, but if you print from bambu handy, that setting will be overridden with the default.
• No brim needed.
• Orca users beware: This software prints a “top right” angle on the build plate as part of its routine. But as the model is large, it will conflict with this pattern. Please avoid using Orca for this (or teach me what name this feature has and how to deactivate it, I couldn't figure it myself)