Adaptable Sponge drip tray by FlorinV

FlorinV

Household>Other House Models

IP Report

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

My choice

Designer

2.2 h

2 plates

4.9(163)

A1 Mini

Designer

2.4 h

2 plates

5.0(29)

Connect 2 or more trays

Designer

11 min

1 plate

4.9(9)

0.2mm layer, 2 walls, 10% infill

2 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

410

967

267

1.4 k

Released

Description

100mm x 80mm dimensions
Simple to print. Looks great in Marble PLA.
Optional adjustable screwing feet for over the sink lip positioning.
The interior is designed with 4 slopes combined to direct the water from all 4 corners to the middle dripping hole.
Front text “KEEP IT CLEAN” …. in case we forget :D
If you want a stronger voronoi grille, you can scale up only the Z axis for the voronoi grille. (non uniform scale)
Update 10.01.2024: I've added another profile with a small “connector”, in case you want more than one drip tray.
If you print 2 or more drip trays, you can print this small connector to hold them together.

Comment & Rating (267)

@Zerschmetterlin

Print Profile

My choice

Nice Idea, works great, thanks.

@FlorinV

Thank you !!

@Zerschmetterlin

Replying to @FlorinV :

Wait a minute... I just realized you also designed the toothpick dispenser? Holy! You are a genius! I was really impressed with the toothpick thing (and I'm an engineer, I'm not easily impressed by anything)! Keep up the good work <3

(Edited)

@FlorinV

Replying to @Zerschmetterlin :

:)) … thank you! glad you like that also!! did you checked my bambu filament cutter? curios of your honest oppinion on that one! ( i had big hope for that, but it was not received so well… maybe i’m missing something …)

@flex.53

Boosted

Print Profile

A1 Mini

Very nice! I changed it a bit so I can mount it on the wall with double sided tape and also filled the holes on the bottom.

@FlorinV

looks good! thank you!

@flex.53

Boosted

Replying to @FlorinV :

Uploaded the remix here: https://makerworld.com/en/models/561032#profileId-480361 Thanks again for the great model!

@AdVanceYourself

Boosted

Print Profile

My choice

Great addition to the kitchen counter. a little small for my sponge so I may play with scaling at some point. I printed at ludicrous speed so ignore the text artifacting.

@FlorinV

thank you! looks too good for that speed ! :)) beside size, you think it could be improved in other ways? i like it in my kitchen, but would love to be heavier…. i’m thinking maybe to increase the infill, but still will not be too heavy…

@AdVanceYourself

Boosted

Replying to @FlorinV :

I was looking around as I also have one of those bristle scrubbers i'd love to put in a tray. Perhaps having some remixes with a tray to the side (and outlet for drainage) with a very slight angle to drain would be awesome. to hold one of these (https://www.ikea.com/us/en/p/videveckmal-dish-brush-with-soap-dispenser-bright-green-90556702/) . and perhaps a remix with it on both sizes to hold the drain stoppers.

@FlorinV

Replying to @AdVanceYourself :

Hi again, Thank you a lot for your ideas. I did add a small connector. Not exactly what you had in mind, but maybe it works for your and it was simple to add this. If you print 2 or more drip trays, you can print this small connector to hold them together. Please check the new profile with the connector.

@cammi187

Print Profile

My choice

modified it a little bit to fit more stuff onto it.

@FlorinV

Nice! You could try and print two times the Voronoi Grille (one above the other) to make it more stronger for the bottle of soap :))

@cammi187

Replying to @FlorinV :

it bends a little bit but I am not concerned about it

@FlorinV

Replying to @cammi187 :

Hello again, I saw you use 2 drip trays. I did add a small connector. You can print this small connector to hold them together. Please check the new profile with the small connector. ( it's 11 minutes print, but I like it, because i hate to have them move around too much. If you try it and you scaled the drip trays, please scale the connector the same )

@NoloM

Boosted

Print Profile

A1 Mini

Scaled 125% sizes and fit perfect.

@FlorinV

looks great!! thanks for the review!

@FlorinV

i covered it in a thin uv resin layer and used an uv lamp. if you want it to be easier to clean and harder for bacteria to build up in PLA

@rondel

Print Profile

My choice

great print

@FlorinV

looks great with those colors!

@herol

works well, the threads are a little tight

The designer has replied

@FlorinV

Wow.... i really like that color ! What filament is that ? Sorry about the threads, I wanted to not move after I set them, as you don't need them to be moved after initial setup. If you want them looser, You can scale the screws down non-uniformly to 99% or even 98%. (only X and Y axis, NOT Z ) Thank you for your review !

@herol

Replying to @FlorinV :

Yeah, it wasn't that much of a problem, the screws went in, just a little hard. The filament is Bambu PLA Basic Green (10500).

@Obiclem

Print Profile

A1 Mini

Great!

@FlorinV

thank you!

@ichhalt

Print Profile

My choice

Beautiful design and easy to print

Show original

@FlorinV

Danke !

@ZenonJarzyna

Print Profile

My choice

very cool! feet heigh regulation is awesome!

@FlorinV

thank you! Glad you like it ! cheers ! 🍻

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Print Profile(4)

Description

Comment & Rating (267)

License

Related Models

Large Drip Tray for Sink

Drip tray for sponge and soap bar

Round drip tray

No Drip Kitchen or Bath Tray