Campbell's Soup Can Dispenser by Zzz3DSelkirk

Zzz3DSelkirk

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.24mm layer, 2 walls, 15% infill

Designer

7.1 h

1 plate

4.6(36)

Open in Bambu Studio

Boost

665

1817

733

309

Released

Description

Soup can dispenser for the size of the cans shown in the photos. Holds 6 cans.

Comment & Rating (87)

@Faylamoon

Hello, I have a question: would it be possible to add another size for this dispenser? I've already experimented a bit, but I can't quite get it right. I need this dispenser precisely for cans that are 11.2 x 7.5 cm. Would it be possible to upload a customized file? I would be very grateful 🥰🥰🥰

The designer has replied

Show original

@6xg4vty98s

It would be a new build. I'll see what I can do.

@Faylamoon

Replying to @6xg4vty98s :

Oh, okay, really :o Only if it's not too much trouble I would be very grateful 🥰 Should it not fit on the print bed, which was the case with this model I tried to scale, this wouldn't be a major issue, one could cut off the rollover protection at the rear top of the model and print it separately, gluing the piece back on at the end 🤔 I think that would be perfectly fine 😋

Show original

@6xg4vty98s

Replying to @Faylamoon :

Fayla...I will see what I can do for you. Is there any other changes you would like to see? Can you post a picture of the can it will hold please.

@roxor

Hi! I have prepared a remix of this model, but current license selected for your model does not allow remixing. Can you please change the license to more permissive? That would allow me to paste official fork onto makerworld.

The designer has replied

@6xg4vty98s

I can change permissions, I believe. Those are locked on the exclusive program. What do you mean paste official fork?

@roxor

Replying to @6xg4vty98s :

I used your model as a base to create it's remix. I can't publish it here since when I point to this model of yours that I used as a based it prevents me to move forward because the license selected for this model of your disallows remixes. If you go to Uploads -> 3D Models -> Published models -> Edit you will find area where you can adjust the license used. You need to decide for yourself, I am attaching a screenshot from one of my models as an example.

@6xg4vty98s

Replying to @roxor :

I will check. This is an exclusive model with a lot of interest so I am earning 25% more points with it the way it is. If it doesn't cost me anything to make the change I certainly would. What change do you want to make with the remix? I could possibly send you a .3mf file.

@kogooo

is this your shop? https://www.ebay.co.uk/itm/387907151071?itmmeta=01JNS04WCZFFV8BNQ0JZGH8X4G&hash=item5a511164df:g:xeEAAOSwCX1np2FV

The designer has replied

@6xg4vty98s

Nope. Thanks. I'm reporting it!!!

@6xg4vty98s

I've launched a support ticket. Thank you for seeing this!

@kogooo

Replying to @6xg4vty98s :

I saw they stole one from my items too... guess the whole shop is based on theft...

@3dPrintFamily

really small and didn’t fit any cans. think this is for small cans only. The soup can comes in different sizes and this is too smal. Will have to increase the size next print. just an fyi

The designer has replied

@6xg4vty98s

Yes I know. There are 2 other versions for medium and larger soup cans. Medium is the chef boy R D size cans (and others shown) and large is for the full size campbells cans.

@3dPrintFamily

Replying to @6xg4vty98s :

Thank you for the information! we will try a larger size next time.

@Tombfyre

Print Profile

0.24mm layer, 2 walls, 15% infill

Printed it on the A1 Mini, so I had to split it. Works great so far though.

@6xg4vty98s

Awesome!!!

@uksniper1

Print Profile

0.24mm layer, 2 walls, 15% infill

awesome thank you 😉👍😎

@meanEugene

Print Profile

0.24mm layer, 2 walls, 15% infill

Works Good for 284 ml Campbell Soup cans

@6xg4vty98s

I also have 3 others for the cans shown in the pics...thanks for printing this.

@user_59663878

Print Profile

0.24mm layer, 2 walls, 15% infill

zu klein

@6xg4vty98s

What was your problem with this print?

@akhisyahmi

What's the size of the can you used in the picture? I want to print it for milk cans.

The designer has replied

@6xg4vty98s

The double stacker (6 cans) is 66dia x 100 tall. Mid size is 75 dia x 112 tall. Large is 78 dia x 126 tall.

@Ind1rect

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

great print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License