Burn Kettlebell Magnet
Burn Kettlebell Magnet
Print Profile(1)
Description
A 2 inch tall Kettlebell magnet.
The logo on front is for the Burn Boot Camp gyms.
Magnet hole on back is designed for 6mm x 3mm magnets.
I created this for a little competition at our local Burn.
Printed on an X1 Carbon
0.4 nozzle
0.2 layer height
6 walls
25% infill
no supports needed when printing just one.
If printing multiple at same time, I suggest using supports just to help with bed adhesion.
Also add a brim if printing a bunch at once.
I blocked the seam from showing on the front of the model.
All seams should be on the backside.
Printing a single model with dual colors using the AMS is quite the time suck. and filament poop party.
One single kettlebell is clocking in at a bit over 4 hours.
16 on one plate took about 16 hours.
I grouped these ones in groups of 8 and had it print per object. so 8 at a time on one plate.
A single kettlebell with only one color is a 38 minute printing time
DISCLAIMER:
This is not in any way associated with the Burn Boot Camp company.
It is an unofficial creation by me.
Bill of Materials
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)