Overview
This Lamp Shade Vase Connector is the key piece that unites three separate 3D-printable models into one striking and functional lamp. By integrating elements from the following designs, it allows you to create a cohesive and stylish lighting fixture:
- Tall Ribbed Shade for Bambu Lamp Kit 001 by gary.sinkowitz
https://makerworld.com/en/models/492255#profileId-405893 - Plant Pot Planter Rib Delta Twisted 1 (120mm) by HpInvent
https://makerworld.com/en/models/474100#profileId-384431 - Bayonet Adapter for Bambu Lamp Designs (E14/E27 sockets) by elRonaldo
https://makerworld.com/en/models/199444#profileId-219981
Instructions
- Secure the Bayonet Adapter
- Print and attach the Bayonet adapter to the Lamp Shade Vase Connector using two M3 × 12mm screws and M3 nuts.
- Once secured, fasten an E12 candelabra bulb base onto the adapter.
- Print the Planter Base
- Print out the Plant Pot Planter Rib Delta Twisted 1 (120mm) as the base of the lamp.
- Attach the Connector
- Place the assembled Bayonet adapter and Connector on top of the planter.
- This provides a stable platform to support the lamp shade.
- Screw on the Ribbed Shade
- Finally, secure the Tall Ribbed Shade on top of the Connector to complete the lamp.
Comment & Rating (4)