Propeller launcher Kit card - Mini Pr-Op Unit-01 by dei.alessandro95

dei.alessandro95

Hobby & DIY>Other Hobby & DIY

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

One colour .2mm height 15%infill

Designer

1.3 h

1 plate

4.7(80)

Multicolor print 0.2mm layer, 2 walls

Designer

4.3 h

1 plate

4.6(17)

Open in Bambu Studio

Boost

681

1460

146

103

1.7 k

944

Released

Description

Beautiful to print with p1s and bambulab profile settings, all pieces fit nice.

Please make sure your printer is well calibrated because you gonna need precision print fit!!

print it using 0.4mm nozzle with 0.2 mm height, try my profile!

If you like my work please consider to BOOST me, it costs you nothing but helps me a lot!!

Added multicolor print with ams and monocolor.

Here a little assembly video :) enjoy!!

https://youtube.com/shorts/qAfZfdh6MBg

Comment & Rating (146)

@Quickid71

Print Profile

One colour .2mm height 15%infill

Fun little toy. Printed a few extra props. Would be nice to offer a separate plate without everything connected.

The designer has replied

@dei.alessandro9

i am working on that!

@Quickid71

Replying to @dei.alessandro9 :

I just separated everything in the slicer but it left the little tags. No big deal! Super easy.

@plasto_m_fan

I experienced the exact same issue and contacted Bambu Lab Their proposed solution was straightforward—warm water with dish soap—and since then I’ve regularly washed the plate, resolving the problem

Show original

@user_1211758467

Boosted

Print Profile

Multicolor print 0.2mm layer, 2 walls

Considerably high consumption of consumables

The designer has replied

Show original

@dei.alessandro9

i know but if you want a kit card.... 😅

@user_1211758467

Boosted

Replying to @dei.alessandro9 :

yes it was my First Multi Color Print

@jerbal_09

Replying to @user_1211758467 :

you print these for giving out to friends for using it yourself there are much efficient ways like print by object and variants without the card

@user_3133020908

Failed twice. It needed a Repair. After that it printed fine.

(Edited)

The designer has replied

@dei.alessandro9

sorry but it is not possible... look at all the reviews, also some of my friends printed it without any problem... try to print directly using my sliced profile, or try to clean your heated bed using isopropanol, let me know!

@plasto_m_fan

Replying to @dei.alessandro9 :

Show original

@dei.alessandro9

Replying to @plasto_m_fan :

yes, soap is better but more annoying to do... do not touch the heated bed with your hands because you can deposit oil on it

@Dipa77

Printed in about one hour with an Ender 3 V3, no supports needed I'd say perfect

The designer has replied

Show original

@dei.alessandro9

Many thanks!! Even though you assembled it upside down 😅😆

Show original

@Dipa77

Replying to @dei.alessandro9 :

Thanks, it's fixed…however, it also worked upside down, haha

Show original

@user_578818310

Print Profile

One colour .2mm height 15%infill

The print was successful, offering a satisfying model assembly experience, with several successful flights achieved However, due to insufficient stability in the upper and lower cover assembly, rapid pulling easily caused disassembly This is likely due to individual printing tolerances, and the design itself is sound

The designer has replied

Show original

@dei.alessandro9

nice print! but please to make it work at the best put the Washer on the bottom of the bigger gear, not on top!! thank you!! watch my video in description to see what i mean

@user_578818310

Replying to @dei.alessandro9 :

My apologies, I had installed it incorrectly. Operation is much smoother after reinstalling, thank you

Show original

@AB3D_85

Print Profile

One colour .2mm height 15%infill

I will test it as a video and if it works I will give more stars

The designer has replied

Show original

@dei.alessandro9

did you watch the assembly video?

@AB3D_85

Replying to @dei.alessandro9 :

See now

Show original

@user_2977789123

Print Profile

One colour .2mm height 15%infill

this was a great print! had 0 issues on a completely untouched p1s with generic pla, no supports even. mechanism works flawlessly and the little launcher guys go so fast you can barely see them lol

The designer has replied

@dei.alessandro9

thank you!! happy you like that!!

@user_634913861

Print Profile

One colour .2mm height 15%infill

really great print, fit was great - my 11 year old enjoyed putting it together and using it.

The designer has replied

@dei.alessandro9

thank you!!!

@user_1007116082

Print Profile

One colour .2mm height 15%infill

Fast printing. Assembly instruction very clear. No need for screws etc. Everything works fine. Beter not use indoors, can hit ceiling pretty hard.

The designer has replied

@dei.alessandro9

thank you!!!

@xsintrk

Boosted

Print Profile

One colour .2mm height 15%infill

Nice clean print, used elego red PLA+. Parts snapped together cleanly, nice design!

The designer has replied

@dei.alessandro9

thank you!!!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.