Lift Table 130x100 by mishkin2

mishkin2

Tools>Hand Tools

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

8.1 h

4 plates

4.7(40)

Open in Bambu Studio

Boost

281

625

779

431

Released

Description

Summary

There are no details here except those that you can print yourself.
Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes, otherwise they will be difficult to clean.
All the details are located in the files with the orientation as they should be printed. The required number of parts is multiplied for successful assembly.

The platform dimensions can be easily modified, increasing to 250 mm if necessary for your needs. During the test, the platform withstood 5 kg of cargo.

https://youtu.be/yLBAJbY2BgQ

Print Settings

Rafts:

Supports:

Resolution:

0,2

Infill:

Comment & Rating (50)

@Frog01

top

@jo2456

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

top

(Edited)

@Chap.eau

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

A fun print! - missing 2 x screws (bolt14mm) The other reviews are useful as a guide on how to assemble. I do wish the tolerances were a bit tighter though. The screws only just hold and the platform is quite soft and wobbly. The platform is functional in PLA. I tried a silk PLA for fun but even printed slowly the parts were not tough enough.

@user_2576193324

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

Highly recommend. Only, 2 bolts short, which are "bolt14mm.stl". When finished, print individual components by selecting "Print Parts". Saving time and material not printing the whole plate. Otherwise great design, useful product, and satisfying assembly.

@vkaloudis

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

Nice one!!

(Edited)

@k.sanak

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

Incorect amount of screws, but design and functionality is perfect.

@user_935837685

Very cool - fits together really well (printed on x1c). Only thing is two of the bolts - the 7mm ones that join Rods 2 & 3, seem to be the too short - the same in the video - I printed off a couple more of the longer 14mm ones instead of the two short ones - and then it all fitted perfectly. Thanks!

@chrissie_nw

Great model. Thanks. Had to use cellotape to keep the screws in but not a hassle

@SugarFries

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

Missing Model Parts:It’s a really fun lift, puts together nicely and works fine! But it’s missing 2 screws for the build, if you use the screws it gives you everything work but on one section the screws don’t reach and won’t tight, but I just printed two screws and it works nice now!