Advanced P1S P1P X1C Nozzle Wiper by sngised_ylgu

sngised_ylgu

3D Printer>3D Printer Parts

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 15% infill

Designer

22 min

1 plate

4.8(166)

0.2mm layer, 2 walls, 20% infill

Designer

21 min

1 plate

4.9(13)

0.2mm layer, 4 walls, 15% infill

44 min

1 plate

5.0(20)

0.2mm layer, 2 walls, 15% infill - ASA

21 min

1 plate

4.5(4)

Click to see more

Open in Bambu Studio

Boost

1359

3348

303

208

2.1 k

1.4 k

Released

Description

I made this nozzle wiper for my P1S I made it as strong and durable as possible, I used the A1 Silicon nozzle wiper from amazon and so far it's doing what it supposed to do. please let me know if you have any questions.

Print this with PETG face down and use support

Use Super glue to secure the silicon wiper in the specific area for a better results.

Thank you for the likes and the boost

**Check the newer version : https://makerworld.com/en/models/928283#profileId-891763

Boost Me (for free)

Bill of Materials

Maker’s Supply Kits and Parts

BT2x8 SHCS Self Tapping Screw (20PCS) - AA019

B-AA019

1.09 USD

× 1

Buy Now

Download BOM

Comment & Rating (303)

@reyesv

Boosted

really loving the openness of this so there's nowhere the filament can grab onto and I've put aluminum tape over the flap and slide to let it drop easier through the shute. Thanks for sharing! Works great! Hopefully it won't be too long when there's a ton of purging during filament swaps.

The designer has replied

@user_264848974

hi can you share photos of where you have placed the aluminum tape in the chute?

@reyesv

Boosted

Replying to @user_264848974 :

here you go….i put the aluminum tape on bothe the Shute and the flap so there’s nothing any of the filament will stick to.

@user_264848974

Replying to @reyesv :

will give this a shot. thanks!

@Brad_Pipis

Print Profile

0.2mm layer, 2 walls, 15% infill

Hello. While awaiting the brush to glue, I must say your version is the one I find visually and conceptually most accurate. I tried printing as per the file, but I disliked the finish of the wall housing the brush. I chose to incline it by 45 degrees, as shown in the photo. I lowered the object by 2 millimeters on the Z-axis for better adhesion to the bed and to eliminate minor imperfections due to the angle. The print took 40 minutes. Thank you for sharing

Show original

@DudePT

profile please?

@Brad_Pipis

Replying to @DudePT :

Hello. I am new to Bambu Lab. I am learning how to add the profile and proceed. Thank you

Show original

@DudePT

press the tree dots and add profile

@ansonl

This wiper works well so far, but the filament seems to build up on the inner side without the ptfe roller to repel it. Is there a solution for this behavior? @user_1637455789

(Edited)

The designer has replied

@user_1637455789

Hi. I am working on V2 and it should have a solution for this.

@ansonl

Replying to @user_1637455789 :

Great, I'd love to try it out when you are finished with it!

@oraleSYKO

status on updated version have same issue with another version and seen its same with yours before i print it.

@skor.187

great print but for some reason the wiper does not gets close to nozzle maybe about 2-3mm away from it. that was my last silicon wiper piece so ill have to order some more to adjust the height a little.

The designer has replied

@user_1637455789

can you show me a picture maybe I can adjust it for you. in my P1S it's all touching as it should be.

@skor.187

Replying to @user_1637455789 :

Any loose strings barely touch the silicone never mind the nozzle. Here is a still image from a paused video as you can see just barely touching

@user_1637455789

Replying to @skor.187 :

is this X1C printer ?

@mc2.project3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I’ve tried many of these, this one seems well-made However, with my new P1S, it doesn’t appear to have these screws and one side is completely empty

Show original

@user_3284863834

Print Profile

0.2mm layer, 2 walls, 15% infill

Superb print. Excellent quality. I’m eager to see if my problem with the original part is resolved. Thank you!!!

Show original

@user_1637455789

Thank you

@user_3864056220

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I did mine in Glow ABS, fits great! I have noticed when using PETG or ABS I get an occasional build up, easy enough to pop off for now but definitely looking forward to a new version, it cleans the nozzle well, and seems to work best with PLA(haven't seen a build up yet anyway). Thanks and nice design!

@WebsII

That’s sweet. do the stock lights charge it enough to actually glow? Looks like you’re using a uv light to make it pop in your picture.

(Edited)

@user_3864056220

Boosted

Replying to @WebsII :

you are correct I used a uv light, and also it doesn't glow to well otherwise. also is the only ABS I have on hand lol. just did the new model, exited to give it a test!

@4x4Mods

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great with petg

@pitti69

Print Profile

0.2mm layer, 4 walls, 15% infill

Clean print and works perfectly Thank you for this part

Show original

@JPACK5

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

printed perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(5)

Description

Bill of Materials

Comment & Rating (303)

License

Related Models

Silicone Nozzle Wiper for P1P, P1S, X1C

Nozzle Wipe X1C P1S P1

3D Printer Nozzle Brush

P1S-X1C-P1P Upgraded Nozzle Wiper | A1 Silicone