i used https://www.printables.com/model/1063435-dji-neo-flashlight-top-mount as a starting point, but as you can see, I modified it to include two clips and a slight angle to descend the drone. I printed this in PETG because it’s slightly flexible, clips on nicely, and the supports are very simple to print. If you have a Bambu ASA Aero, I imagine that will be a nice and lightweight print for your drone.

This was the Led i Used

https://www.amazon.co.uk/dp/B0BGKY2ZRK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1