Reximex Mito .177/.22/.25 120mm Sound Moderator 1/2" UNF

Reximex Mito .177/.22/.25 120mm Sound Moderator 1/2" UNF

Boost
14
24
3

Print Profile(3)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

.177 Calibre
.177 Calibre
Designer
2 h
1 plate
5.0(1)

.22 Calibre
.22 Calibre
Designer
2.1 h
1 plate

.25 Calibre
.25 Calibre
Designer
2.1 h
1 plate

Open in Bambu Studio
Boost
14
24
3
4
21
8
Released

Description

Tested with a relatively low powered air pistol (UK spec). Test safely if using a high powered variant.

 

½" UNF 20TPI Moderator mainly designed for the Reximex Mito Air pistol but should fit others with a male ½" unf connection.

 

Requires Reximex Mito Silencer adaptor to fit which takes the mito's thread to ½" UNF. OR a ½" 20TPI Male thread on any other airgun/pistol.

 

For best fit then you can chase out the threads with a ½" unf 20tpi tap. It will screw straight on as is but may be a little tight. Fit the adaptor first and then the whole unit including moderator onto the pistol.

 

120mm x 30mm compact design works very well, can still use original ironsights or Red dot.

 

(May be a little tight on the thread but still screws on fine).

 

Print's in one piece. Threaded base section flat to the bed.

 

Random seam position

15% infill

Supports (modified angle of 25) and build plate only to support the bottom recess for the adaptor only.

Comment & Rating (3)

Please fill in your opinion
(0/5000)

Cool looking print. Did you happen to come up with the .22 or .25 file? Thank you.
(Edited)
The designer has replied
0
Reply
Hi I will put it up later on for you.
0
Reply
Print Profile
.177 Calibre
0
Reply
No more