Gridfinity 2x1 Tape Dispenser by NoodleExtruderMakerWorld: Download Free 3D Models

NoodleExtruder

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.16mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.8(8)

Open in Bambu Studio

Boost

230

107

Released

Description

This is a 2x1 Gridfinity Tape Dispenser that only requires an 8x1 0.1" pitch pin header as a blade.

Glue the shaft parts into the roller and glue the pin head into the front part as a blade.

You can sharpen the pin head with a file a bit for better results - 0.05" pitch might work even better (untested).

Bill of Materials

List other parts

8x1_PinHeader_0.1"_Pitch x 1

Download BOM

Comment & Rating (24)

@freedj

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

This profile worked perfectly! I added a bit of a second color to show what kind of tape is in the dispenser as we have 3 different flavors.

@freedj

Boosted

This model works perfectly! I love the pin header for the cutter. I colored the top surface to show what kind of tape is in the dispenser.

@linebyline

Print Profile

0.16mm layer, 2 walls, 15% infill

it came out pretty good

@imbaczek

Had to scale the shaft down by 0.4mm in all dimensions and it was a very tight fit - A1, PLA, 0.4mm nozzle. The original shaft design broke when I tried to hammer it into the roller ;)

The designer has replied

@NoodleExtruder

Have you printed a tolerance evaluation sample before? Is the filament calibrated for flow and flow dynamics? I think I designed it with a 0.15 mm gap all around and on P1S it would fall out without using glue. So I think it might be an issue with flow on your side. You can also check if the wall printing order is set to outer/inner in the profile already. But again - was no problem at all for me.

@imbaczek

Replying to @NoodleExtruder :

I did. Square hole fit 0.1mm no problem, cylindrical got stuck on 0.1mm and had a fit (not tight but not loose either) on 0.2mm, hence I scaled the shaft by 0.4mm.

@NoodleExtruder

Did you use a textured or smooth sheet?

@BennyAndthejets

I can't figure out what youre using for the teeth to cut the tape. Are those cut up thumb tacks?

The designer has replied

@NoodleExtruder

It's a 2.54 mm/0.1 inch pin header like the ones you get with electronic PCBs like arduino or esp32

@BennyAndthejets

Replying to @NoodleExtruder :

Thanks for the reply. I'm a noob and I am far from adding electronics to my prints so that explains why I don't know what this is. Good idea for making it gridifinity though!

@NoodleExtruder

Replying to @BennyAndthejets :

It's fairly simple to obtain as many makers have these. If you know anyone who's into electronics there's a high chance they have a leftover one they can give you, it's a few cents really.

@imbaczek

Print Profile

0.16mm layer, 2 walls, 15% infill

printed fine in black but could use guides or markers where the pieces should be mated, it took more than a couple of tries to get it to fit together and open/close smoothly.

The profile uploader has replied

@NoodleExtruder

What do you mean by open and close? Fitting the roll into the main part and taking it out?

@imbaczek

Replying to @NoodleExtruder :

this… is not the object I submitted this review for 😅please disregard, not sure what happened

@NoodleExtruder

Haha ok... still thanks for the five star rating ;)

@tsiawd

I dont even really need this but since I have like 8000 pin headers laying around why not

@user_917463059

I just tried super rigid, I love it

Show original

@ShayneTroxler

Print Profile

0.16mm layer, 2 walls, 15% infill

Works well but my tape was too large of a roll.

@alessio212

Print Profile

0.16mm layer, 2 walls, 15% infill

Highly useful and functional

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.