Filament spool shelf honeycomb

Copyright Claim

Filament spool shelf honeycomb

Boost
690
1232
500

Print Profile(8)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
Designer
3.3 h
1 plate
5.0(192)

Screw Template - 0.2mm layer, 2 walls, 8% infill
Screw Template - 0.2mm layer, 2 walls, 8% infill
Designer
22 min
1 plate
5.0(68)

20mm Spool shelf 0.2mm layer, 4 walls, 8% infill
20mm Spool shelf 0.2mm layer, 4 walls, 8% infill
Designer
3.4 h
1 plate
4.9(54)

23mm Spool shelf , 0.2mm layer, 4 walls, 8% infill
23mm Spool shelf , 0.2mm layer, 4 walls, 8% infill
Designer
3.3 h
1 plate
4.9(37)
Click to see more

Boost
690
1232
500
66
2.2 k
3 k
Released

Description

Designed my own filament spool shelf in honeycomb design. There are 3 versions, for 1" inch wooden dowel, 23mm dowel and 20mm dowel. Used 2pcs M5 wall screws per bracket, spacing between top and bottom screw is 95mm. Its designed just to slid onto mounted screws, witch should have 5mm space between screw head and wall.

 

Added template for easier drilling holes and adjust right screw distance, also added plane if you want to you use spirit level.

 

Added endcap for those whom wooden dowel extends from shelf bracket to prevent filament spool tipping over. Also made divider so you can separate different type of filaments from each other on one shelf and not mixing them accidentaly. Here: https://makerworld.com/en/models/117747#profileId-126576

 

Also added filament material tags so you can separate different type of filaments from each other, here: https://makerworld.com/en/models/117775#profileId-126618

 

Comment & Rating (500)

Please fill in your opinion
(0/5000)

Printed 7 brackets in black pla-cf and look awesome. Great design. Would be great if you could make a separator or an end cap for this.
The designer has replied
2
Reply
You mean some separator between spools attached to dowels?
0
Reply
Replying to @Maoirae :
yes to separate pla from petg or carbon fiber etc. also for the ends if some people have the dowels sticking out passed the bracket to make like an end cap to stop rolls from possible falling off. just some suggestions.
0
Reply
Replying to @Maoirae :
something like this
0
Reply
Print Profile
1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
worked really well. these things are beefy!
The designer has replied
1
Reply
Check my profile for divider and endcap for this spool shelf, also added filament tags :)
0
Reply
Did you print with PLA? Wondering about strength on these with 48" dowels and being fully loaded.
0
Reply
Replying to @dustyd88 :
I think it's in PETG
0
Reply
Print Profile
1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
Used Bambu PETG Black and Orange. Printed perfectly. Happy to get my spools organized! Printing another and end caps/dividers next!
The designer has replied
4
Reply
Nice colors 👍 Im glad you like it 🙂
(Edited)
1
Reply
Print Profile
20mm Spool shelf 0.2mm layer, 4 walls, 8% infill
Clean storage place for 24-26 filament rolls as a beginning. I’m loving it! perhaps a third rack left of the door above the other one in the future!?
The designer has replied
2
Reply
I'm glad you like it. There is allways not enough space for filament :D
(Edited)
1
Reply
Check my profile for divider and endcap for this spool shelf, also added filament tags :)
(Edited)
2
Reply
Replying to @Maoirae :
divider and signs printed.😉
(Edited)
1
Reply
Print Profile
20mm Spool shelf 0.2mm layer, 4 walls, 8% infill
Great print, very strong, looks good. I did black PETG with 3/4" wood dowels from Lowes.
The designer has replied
2
Reply
Im glad you like it
0
Reply
Woher bekomme ich so eine Lampe? Oder hast du die selbst gemacht?
0
Reply
Print Profile
1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
printed on A1mini. it's doable just require time and supports but still comes out great! I loaded the profile I used. thanks.
The designer has replied
1
Reply
Nice, just be sure not to overload it too much, because printed standing will not be as strong as laying on its side.
0
Reply
Replying to @Maoirae :
ok thank you! I did ad a bit more infill and wall loops. I plan on using 3 for a 48" dowel. so I will post pic when I have all 3 printed and mounted. 😉
(Edited)
1
Reply
Replying to @Chromatic3DPrin :
Ok, let me know how its holding
0
Reply
I am in heaven. We printed six of these brackets and partner bought the rods… now we have a dream filament storage system. Strong and it looks good too. Thank You!
(Edited)
The designer has replied
2
Reply
Im glad you like it 🙂
0
Reply
Print Profile
1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid
Printed great and works well. Plan to make another rack to put above this one.
The designer has replied
1
Reply
Im glad you like it
0
Reply
Print Profile
23mm Spool shelf , 0.2mm layer, 4 walls, 8% infill
These worked great. Printed in PETG. Got 2 broom handles from the local hardware shop for £5. Will probably print a 3rd bracket to brace the middle section
The designer has replied
1
Reply
Im glad you like it
0
Reply
Made mine out of black and red pla.
The designer has replied
1
Reply
Looks good
0
Reply