Bambu Scraper and glue storage - Gridfinity by Madness3D

Madness3D

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.9(22)

Open in Bambu Studio

Boost

147

207

151

Released

Description

Organize your Bambu scraper and adhesive in this perfect shaped storage.

Storage for:

1x Bambu Scraper

1x Bambu liquid adhesive

1x Bambu lab glue stick

Sized to fit in a 2x1gridfinity storage.

Storage box has 6x2mm magnet holes (press fit) to fit in a gridfinity magnet base.

Check out my other gridfinity models if you need suitable gridfinity bases or boxes.

bambu lab accessories

printer accesories tray

printer accessories

printer tools

Bill of Materials

Maker’s Supply Kits and Parts

D6x2mm Round Magnet (20PCS) - CA004

$2.29 USD

B-CA004

× 8

Buy Now

Download BOM

Comment & Rating (23)

@enclaved

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed well. Glue stick fit is kind of tight.

@raedically

Print Profile

0.2mm layer, 2 walls, 15% infill

A little tight fit for the liquid glue, but works great overall, thank you!

@frankieorabona.

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent printing. And thank you for the project!

@Konimaa

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfectly

(Edited)

@DuskMallard

Print Profile

0.2mm layer, 2 walls, 15% infill

@limjiajun

Interesting that others seem to have fit issues for the liquid glue... I only have fit issues for the glue stick. Had to widen the glue stick's hole a bit using a negative shape, but otherwise good design! I downloaded the STL and sliced it myself, if that matters. Defaults for PLA - 0.2mm layer, 2 walls, 15% infill. Not sure if there's any difference between that and the 3MF.

(Edited)

@okoyim

Print Profile

0.2mm layer, 2 walls, 15% infill

middlr compartment was a little small for my magigoo but otherwprinted great!!

@Fredrick1

Print Profile

0.2mm layer, 2 walls, 15% infill

printed as expected. looks great. very useful.

@bobodybusiness

Print Profile

0.2mm layer, 2 walls, 15% infill

slightly tight around gluestick but still fits

@laggededed

Print Profile

0.2mm layer, 2 walls, 15% infill

very nicely done, prints and fits perfectly! Thank you

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.