***This model needs to be printed in TPU (or other similar, flexible material) or it will not fit.

For 2025, Tesla has made another small design update, this time upgrading the rear camera on the Model 3 and Model Y. The update includes adding a protective lip around the camera to give it better protection against rain, dirt, snow, and road grime. Here is what the OEM looks like.

Full disclosure - I have honestly not had too many occurrences in getting a dirty lens on my MYP even though it is driven daily and we see a lot of rain in Florida. I do, however, wash my car every 2 weeks and use spray wax / ceramic, and I have mudflaps installed which all possibly helps in keeping things a bit cleaner.

That said, I was feeling a bit left out with my 2023 Model Y, and so I decided to take a stab at creating something similar, except out of TPU.

I've seen some other models floating around that were press-fit and I didn't like the idea of potentially scratching the lens etc.

This model is a tight fit, you will need to fiddle just a bit to get the shield around the lens but it should therefor stay in place. I have not tested in summer time yet to see if it will warp or expand due to heat. I suspect that if you hit this with a high-powered pressure washer at the right angle it might still come loose. It does hold in place at highway speeds with no problem.

To the best of my ability, I have also tested the fit to ensure it does not obstruct the camera view. I also verified this using the camera preview view which is a much wider view than the standard rear camera view you see when backing up. I have not seen any images in the wild of someone with the OEM shield and what that looks like in the camera preview - I would assume Tesla engineered the shield to not obstruct the wider view as well.

Whether or not this thing does anything positive for me is hard to tell - as stated, I haven't had but one instance of a smudged lens.

Disclaimer: This 3D printable model is provided "as-is" for personal use only. By downloading and using this model, you assume all responsibility for its installation and any potential risks, including interference with your vehicle's safety or autonomous features. The creator is not liable for any damages, malfunctions, or injuries resulting from its use. Always ensure modifications comply with your vehicle's specifications and local laws.

This model was only tested with TPU (Bambu TPU 95A HF).

If you have any feedback or ideas for modification - I'm happy to keep tinkering.

Enjoy.